1 / 1
Model No. : | ST-K-3 |
---|---|
Brand Name : | SATIS |
Product description
Description:
Optimal Working Pressure(BAR/PSI): | 3-5/45-80 |
Pattern Width(CM): | About 10 |
Air Consumption: | 2-4cmf |
Feed Type: | Gravity |
Air Inlet: | 1/4(bsp/nps/npt) |
Capacity Of Cup(ML): | Aluminum 200ml |
Nozzle Size: | 0.5/0.8/1.0 |
Feature :
1. Designed for use with most finishing materials without corrosive and abrasive.
2. Suitable to spray painting of vehicles, furniture, machinery, equipment and housing.
3. Detachable and washable.
4. Sprays smooth and fine fluid.
5. Creats perfect painting effect .
Package Content :
1 x Spray Gun
1 x Metal Cup
1 x Spanner
1 x Brush
1 x Operation Manual
Mini ST-K3 Air Spray Gun For Repairing , Air Tools :
Assembly Drawing:
Parts List | |||||
Part | Description | Qty. | Part | Description | Qty. |
1 | Air Nozzle | 1 | 22 | Trigger Valve Assembly | 1 |
2 | Nozzle Retainer | 1 | 23 | Trigger Valve Bushing | 1 |
3 | Fluid Nozzle | 1 | 24 | Trigger Valve O-Ring | 1 |
4 | Body | 1 | 25 | Trigger Valve Housing | 1 |
5 | Needle Packing | 1 | 26 | Trigger Adjust Bushing | 1 |
6 | Needle Packing screw | 1 | 27 | Trigger Valve Adjust Knob | 1 |
7 | Trigger Bearing stud | 1 | 28 | Fluid Adjusting Valve Assembly | 1 |
8 | Trigger | 1 | 29 | Fluid Needle | 1 |
9 | Trigger Circlip | 1 | 30 | Fluid Needle spring | 2 |
10 | Trigger seal | 1 | 31 | Fluid Needle spring | 1 |
11 | O-Ring | 1 | 32 | Fluid Valve Fastener | 1 |
12 | Trigger Packing | 1 | 33 | Fluid Valve Control Knob | 1 |
13 | Trigger Return Spring | 1 | 34 | Air Adjusting Valve Assembly | 1 |
14 | Air Valve seat | 1 | 35 | Air Valve seat | 1 |
15 | Air Valve shank | 1 | 36 | Air Ball Valve | 1 |
16 | Air Needle Valve Assembly | 1 | 37 | Fluid Valve O-Ring | 1 |
17 | Air Needle | 1 | 38 | Air Valve Bushing | 1 |
18 | Air Needle Bushing | 1 | 39 | Air Valve Fixing sleeve | 1 |
19 | Air Needle spring | 1 | 40 | Air Valve Control Knob | 1 |
20 | Air Needle spring seat | 1 | 41 | Paint Cup Nipple | 1 |
21 | Trigger Valve spring | 1 | 42 | Air Line Nipple | 1 |
Maintenance:
After each use, thoroughly clean the spray gun.
1.Empty the Paint Cup of paint, and wipe it out with a clean rag.
2.Fill the Paint Cup about halfway with the solvent appropriate for the paint used.
3.Spray the solvent into an appropriate receptacle for proper disposal.Continue to spray until paint in the
interior of the Spray Gun is ejected and the solvent spray is clear.
4.Using a clean rag damp with solvent, wipe off the Spray Gun to remove paint from the exterior.
5.Store your paint sprayer in a clean dry place.
Send your inquiry to this supplier