200Ah Energy Storage Battery

6-CNJ-200 Gel Battery Specifications

For Energy Storage

1. Structure : The battery consists mainly of positive plates, negative plates, membrane, electrolyte, valves, a container and a cover.

2. General Parameters :

Nominal Voltage

12V

Rated Capacity

200 Ah ( 10 hr, 1.80 V / Cell, 25 ℃ )

Weight

55 KG ±3%

Resistance

≤ 3.6 mΩ

Terminal

Copper, 6 mm² x 1.5 M

Max. Charge Current

50 A

Applicable temperature range

-35 ~ 55 ℃

Dimension

Length    ( ±2 mm )

523 mm

Width     ( ±2 mm )

240 mm

Height     ( ±2 mm )

220 mm

Total Height  ( ±2 mm )

240 mm

Cover Material

ABS

Application Fields

Applied solar power ( wind energy ) household system, off-grid power plants, solar power ( wind energy ) communications/signal base stations, solar power ( wind energy ) lamps, nonstationary energy storage systems,  solar traffic lights, solar building systems etc.

3. Product Stand :   GB/T 22473-2008  /  IEC 61427-2005

4. Technical Advantage :

1 ). The traction structure for convenient connection, which achieves a real pre-buried installation, avoids the corrosion of terminals.

2 ). With multicomponent Alloys of high tin rare earth, the electrode plate is anti-corrosion. The internal resistance is small, and of higher efficiency in the discharge and strong charge acceptance.

3 ). The use of special paste additives, makes the battery low self discharge, deep discharge resistance and strong recovery.

4 ). Using high temperature and high moisture curing process, it keeps stable of the PAM interface structure of the paste and grids, and increases battery balancing consistency.

5 ). For special climate at high altitude environments, we made a special selection for material, design of structure and special formula to enable to accommodate a maximum altitude of 5,500 meters.