Video
1 / 4
Model No. : | 50000Cubic meter |
---|---|
Brand Name : | Mingyuan |
Certification : | Other |
Zhengzhou, Henan, China
Product description
Mingyuan can provide the complete solution for the aac production line, and the size of the block can be adjustable according to your clients' requirements. and the main
raw material can be either sand or fly ash. AAC Block is an important construction material which main features light weight, Good heat preservation and air resistant, AAC block plant is a cost effective aac block production line with sand, cement, lime, aluminum powder, fly ash as the main materials, the main equipment for a aac block plant includes jaw crusher, bucket elevator, ball mill, mixer, slurry pump, cutting machine, boiler, crane, and autolaves.
General introduction about the production process for AAC block plant /AAC brick plant.
Mainly process of AAC Block Production Plant /AAC Production Line / AAC Production Plant
1. Lightweight: Porosity achieve 70% to 85%, volume density is generally 500-900kg/m3, as 1/5 of general concrete brick, the 1/4of clay brick, the 1/3 of hollow brick, and similar with wood can float in water. It can reduce building weight, reduction in the cost of integrated building, moreover, prolong building's life.
2. Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance, and do not emit harmful gases when meet fire. Fire 650 degrees, as a refractory material, the thick up of 100 mm walls can reach to 4 hours fire resistance, 300mm thick up wall can reach to 9 hours fire resistance.
3. Sound insulation: Due to a unique porous structure, so it has a sound absorption capacity. The sound absorption capacity can reach of 100mm thick wall up to 41 db.
4. Insulation: As the material inside has a large numbers of the pores and porous, which has a good thermal insulation properties. The Thermal conductivity is 0.11-0.16W/MK, as 1/4-1/5 of brick. Typically, the insulation effect of 20cm thick aerated concrete wall is equivalent to 49cm thick solid brick walls ordinary.
5. Permeability: Result of material by the composition of many independent small pores, the moisture absorption is slow, in the volume of absorbent is 5 times of clay saturation do. When used in the bathroom, the wall can be treated to interface directly paste tiles.
6. Anti-seismic: The same building structure, improve the two seismic than the brick level.
7. Green: Manufacturing, transportation, all use the process of non-pollution, to protect arable land, saving energy, is one kind of a green building material.
Below is the proportion of each element for the AAC Block Production Plant /AAC Production Line / AAC Production Plant
Name
Unit
Cement Lime Sand
Sand
%
55-65
Cement
%
10-20
Lime
%
20-30
Gypsum
%
2-3
Aluminum powder paste(600kg/m3)
1/10000
8
Water & material rate
0.65-0.75
Casting system
OC
35-38
Aluminum mixing time
S
30-40
Video
Zhengzhou, Henan, China
Send your inquiry to this supplier