135degree adhesive heat insulation tube for wire harness
Description
SBRS-135G (3X) (4X) is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior sealing against water, corrosive gas and chemicals. Typical applications include environmental sealing of in-line splices, sealing and strain relief of connectors and terminals, abrasion protection and electrical insulation of automotive wiring harness splices and valuable components, fleet & marine sealing & protection and wire bundling etc.
Features
Standard:AMS-DTL-23053/4,UL 224
Shrink ratio:3:1,4:1
Flame retardant outer layer, environment friendly, UV resistant
Shrink temperature:80°C~120°C
Continuous operating temperature:-55°C~125°C
RoHS compliant
Standard color: Black
Technical Performance
Property |
Typical data |
Test method/condition |
Tensile strength |
≥13MPa |
ASTM D 2671 |
Elongation at break |
≥400% |
ASTM D 2671 |
Tensile strength after heat aging |
≥11MPa |
158ºC×168h |
Elongation after heat aging |
≥300% |
158ºC×168h |
Longitudinal change |
0~-10% |
ASTM D 2671 |
Flammability |
Self extinguishing in 30 sec. |
AMS-DTL-23053/5 |
Heat shock |
No cracks, no dripping |
ASTM D 2671,250ºC×4h |
Dielectric strength |
≥15kV/mm |
IEC 60243 |
Volume resistivity |
≥1014Ω.cm |
IEC 60093 |
Technical Performance of Adhesive
Property |
Typical Data |
Test method/condition |
Softening point |
95±5ºC |
ASTM E 28 |
Water absorption |
<0.5% |
ASTM D 570 |
Peel strength(PE) |
≥120N/25mm |
ASTM D 1000 |
Peel strength(AI) |
≥80N/25mm |
ASTM D 1000 |
Dimensions(3:1)
Size |
D As supplied ID(mm) |
After full recovery(mm) |
Standard package |
mm |
inch |
ID d |
Wall thickness w1 |
Thickness of adhesive w2 |
(m/spool) |
Φ3.0(3.2) |
1/8 |
≥3.0 |
≤1.0 |
≥1.00 |
0.50 |
200 |
Φ4.8 |
3/16 |
≥4.8 |
≤1.5 |
≥1.00 |
0.50 |
100 |
Φ6.0(6.4) |
1/4 |
≥6.0 |
≤2.0 |
≥1.00 |
0.50 |
100 |
Φ7.9 |
2.5/8 |
≥7.9 |
≤2.7 |
≥1.00 |
0.50 |
100 |
Φ9.0(9.5) |
3/8 |
≥9.0 |
≤3.0 |
≥1.40 |
0.60 |
50 |
Φ12.0(12.7) |
1/2 |
≥12.0 |
≤4.0 |
≥1.60 |
0.80 |
25 |
Φ19.0(19.1) |
3/4 |
≥19.0 |
≤6.0 |
≥2.10 |
0.80 |
25 |
Φ24.0(25.4) |
1 |
≥24.0 |
≤8.0 |
≥2.40 |
1.0 |
25 |
Φ40.0(39.0) |
1-1/2 |
≥40.0 |
≤13.0 |
≥2.40 |
1.0 |
25 |
Note:Non-standard dimensions and package are available on request
Dimensions (4:1)
Size |
As supplied D(mm) |
After full recovery(mm) |
Standard package |
mm |
inch |
ID |
Wall thickness |
Thickness of adhesive |
(m/spool, m/pc) |
Φ4.0 |
2/13 |
≥4.0 |
≤1.0 |
1.05±0.30 |
0.50±0.20 |
200 |
Φ6.0 |
1/4 |
≥6.0 |
≤1.5 |
1.15±0.30 |
0.50±0.20 |
100 |
Φ8.0 |
5/16 |
≥8.0 |
≤2.0 |
1.55±0.30 |
0.60±0.25 |
100 |
Φ12.0 |
1/2 |
≥12.0 |
≤3.0 |
1.75±0.30 |
0.60±0.25 |
25 |
Φ16.0 |
5/8 |
≥16.0 |
≤4.0 |
2.00±0.35 |
0.70±0.30 |
25 |
Φ20.0 |
4/5 |
≥20.0 |
≤5.0 |
2.30±0.40 |
0.70±0.30 |
25 |
Φ24.0 |
1 |
≥24.0 |
≤6.0 |
2.60±0.40 |
0.75±0.30 |
25 |
Φ32.0 |
1-1/4 |
≥32.0 |
≤8.0 |
3.00±0.50 |
0.90±0.30 |
1.22 |
Φ52.0 |
2 |
≥52.0 |
≤13.0 |
3.35±0.50 |
0.95±0.30 |
1.22 |
Note: Non standard dimensions and package are available on request