1000w/24v sine wave inverter with AVR function

APV Pure Sine Wave Inverter, Solar Charger
APV solar charger is a combination of APC inverter and solar charger. The APV pure sine wave inverter not only makes your solar system simple in wiring, but also has all the unique features from the inverter and solar charger.
Features of APV Pure Sine Wave Inverter, Solar Charger
1. APV pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections.
2. High overload ability of our APV charger is up to 300% rated power(20 sec.), and low voltage trip 9.5V/10V or 10V/10.5V is selectable.
3. Our APV solar charger can achieve reverse current protection and battery temperature compensation, with the high efficiency MPPT function(97%). Auto input DC voltage can be detected between 12V/24V.
4. Our APV pure sine wave inverter supports 3-step intelligent battery charging, and equips with 8 preset battery type selector for totally flat batteries. Its powerful charge rate up to 90Amp**. In addition, PFC(power factor correction) is adopted for charger, which has less power consumption than conventional units
5. LCD status display, USB communication port, battery/AC priority switch are available for our APV pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
Note:*For 1KW one. **For some models.
6. The APV solar charger has 15s delay before transfer when AC resumes, and the function of overload protection when it equips with generator. Also, it allows start up and through power with depleted batteries.
7. 10ms typical transfer time between battery and AC, which guarantees power continuity of APV pure sine wave inverter. Its input AC voltage is selectable (184-253V or 154-253V) for different kinds of loads.
Technical Parameters of APV Pure Sine Wave Inverter, Solar Charger

Electrical Specvifications
	Model	APV 1000W	APV 1500W	APV 2000W	APV 3000W	APV 4000W	APV 5000W	APV 6000W
Output (Inverter mode)	Continuous Output Power	1000W	1500W	2000W	3000W	4000W	5000W	6000W
Surge Rating	3000W	4500W	6000W	9000W	12000W	15000W	18000W
Output Waveform	Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency	>88%(Peak)
Line Mode Efficiency	>95%
Power Factor	0.9-1.0
Nominal Output Voltage rms	100-110-120Vac / 220-230-240Vac
Output Voltage Regulation	±10% RMS
Output Frequency	50Hz ± 0.3Hz/60Hz ± 0.3Hz
Short Circuit Protection	Yes( 1sec after fault )
Typical Line Stansfer Time	10ms(MAX)
THD	＜10%
DC Input	Nominal Input Voltage	12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage	10.0Vdc
Low Battery Alarm	10.5Vdc / 11.0Vdc
Low Battery Trip	10.0Vdc / 10.5Vdc
High Voltage Alarm	16.0Vdc
Low Battery voltage recover	15.5Vdc
Idle Consumption-Search Mode	< 25 W when Power Saver On
AC Charger	InputVoltage Range	Wide: 90~135VAC / 164~243VAC; Narraw: 100~135VAC / 194~243VAC;
Output Voltage	Depends on battery type
Max Charge Rate	35A / 70-90A Max (Charger Current Control)
BatteryInitial Voltage for Start Up	Circuit breaker
Over Charge Protection Shutdown	15.7V for 12V( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge	Batterytypes ( *2 for 24Vdc, *4 for 48Vdc)
Batterytype	Fast V Float V( *2 for 24Vdc, *4 for 48Vdc)
Gel U.S.A	14.0	13.7
A.G.M 1	14.1	13.4
A.G.M 2	14.6	13.7
Sealed Lead Acid	14.4	13.6
Gel Euro	14.4	13.8
Open Lead Acid	14.8	13.3
Calcium	15.1	13.6
De-sulphation	15.5 for 4hrs
Remote Control	Yes. Optional
Bypass & Protection	Input Voltage Waveform	Sine wave (Grid or Generator)
Nominal Voltage	120VAC / 230VAC
Low Voltage Trip	90V±4%/184V/154V±4%
Low Voltage re engage	100V±4%/194V/164V±4%
High Voltage Trip	140V±4%/ 253V±4%
High Voltage re engage	135V±4%/243V±4%
Max Input AC Voltage	150VAC/270VAC
Nominal Input Frequency	50Hz or 60Hz (Auto detect)
Low freq trip	47Hz± 0.3Hz for 50Hz, 57Hz± 0.3Hz for 60Hz
Low freq re engage	48Hz± 0.3Hz for 50Hz, 58Hz± 0.3Hz for 60Hz
High freq trip	55Hz± 0.3Hz for 50Hz, 65Hz± 0.3Hz for 60Hz
High freq re engage	54Hz± 0.3Hz for 50Hz, 64Hz± 0.3Hz for 60Hz
Overload protection	Circuit breaker
Short circuit protection	Circuit breaker
Transfer switch rating	30amp	40amp
Max bypass current	30amp	40amp
Bypass over load current	35amp: Alarm	45amp: Alarm
Solar Charger	Rated Voltage	12V/24V/48V
Rated Charge Current	40A/60A
Rated Output Current	15A
Self Consumption	< 10mA
Bulk Charge	14.5V(default)	( *2 for 24Vdc, *4 for 48Vdc)
Floating Charge	13.5V(default)
Equalization Charge	14.0V(default)
Over Charge Disconnection	14.8V
Over Charge Recovery	13.6V
Over Discharge Disconnection	10.8 V(default)
Over Discharge Reconnection	12.3V
Temperature Compensation	-  13.2mV/℃
Ambient Temperature	0-40℃(full load)  40－60℃(derating)
Mechanical Specifications	Mounting	Wall mount
Inverter Dimensions(L*W*H)	598*218*179mm	470*190*340mm
Inverter Weight	21KG	22kg	23KG	27KG	38KG	48KG	48KG
Shipping Dimensions(L*W*H)	740*315*300mm	530*240*390mm
Shipping Weight	23KG	24kg	25KG	29KG	40KG	50KG	50KG
Display	Status LEDs / Status LEDs+LCD
Standard Warranty	1 Year