1 / 4
Model No. : | FT-XJD-60W-2 |
---|---|
Brand Name : | FORZATEC |
Certification : | RoHS |
Product description
Product advantages
The controller of this product is controlled by micro-computer, which has the functions of preventing overcharge and overdischarge, and greatly improves the life and safety of batteries. Humanized design control system, automatic light control at night, automatic light off during the day, solar panels can be adjusted from multiple angles to improve charging efficiency.
1. Integrated design and modular production, easy installation.
2. Entire packaging, convenient and safe transportation.
3. The product uses high-efficiency imported LED chips with a life of up to 50,000 hours.
4. High waterproof performance, safe and reliable.
5. This product uses high-efficiency and long-life lithium iron phosphate batteries to ensure the service life of the whole product.
6. This product does not need laying wires and municipal electricity. It is easy to install, energy-saving and environmental protection, and has a long service life.
Model |
FT-XJD-60W-2 |
Power |
60W,50cm*21cm*5cm |
Solar panels |
6V30W |
Number of chips |
60PCS |
Control mode |
light control + time control |
Lithium iron phosphate battery |
115Wh |
Light flux |
180 lm/W |
Colour temperature |
6000K-6500K |
Chromogenic index |
Ra≧75 |
Optically Controlled Voltage |
1.5V |
Full time required |
4-6h |
Working temperature |
-5---60℃ |
arm |
Long:120cm;caliber:5.8cm |
Warranty |
3 years |
Installation method
1. Fix the hoop of the lamp pole arm on the wire pole and tighten it with screw (fix it on the wall, mark the four vacancies with colored pen or other marking tools, drill holes and tighten the four expansion screws).
2. Install the U-frame on the solar panel and connect it to the lamp pole. The best way to install the solar panel is to tilt 45 degrees south.
3. Connect the two red wires of the lamp head and clamp them with the wiring head, and tighten the nut corresponding to the solar connection line (the slot must be aligned).
4. Cover the solar panels and test the lights. If everything is normal, the lights will turn on automatically at night.
Send your inquiry to this supplier