XKS-02 cast iron defect welding machine / casting, foundry welding equipment

XKS-02 cast iron defect welding machine / casting, foundry welding equipment, without high heat in welding 1.Main Parameters:   1.Input Voltage: AC220V Single-phase: 50/60Hz 2.The maximum power:2000W 3.Second output voltage:20-160 4. Maximum capacity:560UF 5.Frequency Variable Range(Discharge Times/Second):40-2100HZ 6.Spot Temperature :8000~10000 7.Electrode size:1.0-3.2MM 8.Size (L*W*H) :485*315*365mm 9.Weight:30kg 10.Acessories: One electrode gun, one earth wire, one argon connector, one power line, a Sun glasses, a package welding wire, one small key   Main configuration: 1.Portable and light weight. After repair, the parts surface keep normal temperature. As it is cold welding with no heat. 2.The repair effect is better than traditional ARC welding, TIG welding, laser welding, etc. Please check following picture:     Application: 1. Main application of XKS-02 / XKS-01/SZ-3000/SZ-08 and other machines: Dies, forging dies, injection dies, die-casting, pressure casting dies, metal products, machine spare parts and other tools.   2.  Suitable defect of XKS-02/ XKS-01/SZ-3000/SZ-08 can repair:  Pin holes, gas hole, burring, flash, bump, scuffing, edge chipping, pinhole porosity, crackle, abrasion, wear and tear, miscalculation in manufacture, defect in manufacture, welding defect.   3.  Suitable material of XKS-02/ XKS-01/SZ-3000/SZ-08 can repair: Aluminum material, aluminum alloy, copper material, copper alloy, low carbon steel, medium carbon medium, die steel, stainless steel, casting steel, cast iron, cast aluminum, tungsten carbide alloy, and all electrical conductor.   4.  The position of XKS-02 and other machines can repair: Sharp corner, sharp-edged orifice plate,  groove or furrow, side wall or jamb, bottom, deep cavitiy, flat surface, and etc.         2. Cold welding machine principle: Cold welding machine is using arc spark effect in the air. Electrode material made of alloys is sparking dissolved and deposited on the metal work piece.   2.1: Charge: The condenser is charged when electrode and work piece is separated. The temperature of the spark point is approximately 25,0000°C, however, no heat accumulation occurs during diffusion and deposition periods since the pulse period is extremely short compared to the interval period.   2.2: Electro Spark: Electro spark between electrode and base material, only contact area temperature will be approximately 25,0000°C.   2.3. Transfer: transfers a small quantity of the electrode to the work piece under an ionized state. 2.4. Hardening (coating): produces a strong metallurgical bonding. Comparison between ESD cold welding machine & TIG welding machine: Remarks: Red circle is TIG welder welding effect: Yellow circle is Cold welder welding effect: 
We can see Cold welding effect is much better than TIG welding. Welding without grinding------Welding after grindng   Welding examples: 1. Weld holes, pin holes in metals,   2.  Weld aluminum parts, stainless steel parts:   3. Weld holes, scratch in big machine ( like hydraulic liner, machine tool guide ways, pumps, etc)     Contact information:
Contact person: (Miss) Lana Wei   Phone: 0086-021-52697550,  Fax: 0086-021-66081805   Mobile: 0086-13761084602 ( whatsapp)   SKYPE: lanalana0562   Website: www.szlenghan.com      www.shshengzao.com