Wood gas generator and biogas generator

The generator set to the requirements of the gas:

1, the unit for natural gas requirements before the gas intake regulator from the unit within 1m, ① gas pressure 100 ~ 300kPa (booster) or 50-300 kPa (unpressurized aircraft); ② methane gas volume content not less than 70%; ③H2S≤20mg / Nm3; ④ impurity particle size <5μm, impurities ≤30mg / Nm3;

If combustible gases containing sulfur and high ammonia ingredients, not only can severely erode spark plug electrodes, but will also increase the acid value of the oil, corrosion unit internal parts, while being easy to generate a precipitate, increase corrosion and wear on the engine.
2, the unit of the biogas requirements before the gas intake regulator from the unit within 1m, ① gas temperature ≤40 ℃; ② gas pressure 3 ~ 10kPa, pressure change rate ≤1kPa / min; ③ biogas methane content is not low volume to 40%, the rate of change ≤2% / min; ④H2S≤200mg / Nm3; ⑤NH3≤20mg / Nm3; ⑥ impurity particle ≤5μm, impurities ≤30mg / Nm3; ⑦ in the moisture content of the biogas ≤40g / Nm3. For the methane content of 30 to 40% by volume of methane special needs unit configuration, choose another type of product.
If combustible gases containing sulfur and high ammonia ingredients, not only can severely erode spark plug electrodes, but will also increase the acid value of the oil, corrosion unit internal parts, while being easy to generate a precipitate, increase corrosion and wear on the engine.
3, the crew requirements for gas before the gas intake regulator from the unit within 1m, ① gas temperature ≤40 ℃; ② gas pressure 3 ~ 10kPa, pressure change rate ≤1kPa / min; ③ volume content of methane gas is not low to 9%, the rate of change ≤2% / min; ④ the methane gas content of less than 30% by volume of methane and oxygen and the volume content of not less than 28% by volume oxygen content of not less than 16%; ⑤ impurity particle size ≤5μm , impurities ≤30mg / Nm3. ⑥ hydrogen sulfide content of not more than 200mg / m3. For out of range of the gas required to communicate with the manufacturer, according to verify the feasibility of the gas composition.
4, the unit requirement of coke oven gas before the gas intake regulator from the unit within 1m, ① coke oven gas temperature ≤40 ℃; ② coke oven gas pressure 3 ~ 10kPa, pressure change rate ≤1kPa / min; ③ focus hydrogen furnace gas volume fraction ≤60%; ④H2S≤200mg / Nm3; ⑤NH3≤20mg / Nm3; ⑥ tar ≤50mg / Nm3; ⑦ impurity size ≤5μm, impurities ≤30mg / Nm3; ⑧ coke oven gas in the water content ≤40g / Nm3.
If combustible gases containing sulfur and high ammonia ingredients, not only can severely erode spark plug electrodes, but will also increase the acid value of the oil, corrosion unit internal parts, while being easy to generate a precipitate, increase corrosion and wear on the engine.