Product description
Product Description
Withdrawal sleeves
Withdrawal sleeves can be used to mount bearings with a tapered bore on cylindrical seats of stepped shafts (fig 1). The sleeve is pressed into the bore of the bearing that abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. Lock nuts or endplates are not supplied with the withdrawal sleeves. KM or HM lock nuts and respective locking washers are suitable but must be ordered separately. Further information will be found in the section Lock nuts with locking washer or clip.
To secure the bearing to the shaft, press the withdrawal sleeve into the bearing bore. To do this, particularly where larger bearings are concerned, considerable force is required to overcome the friction between the mating surfaces of the bearing and sleeve and of the sleeve and shaft. Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut (fig 2).
Main types we offered: AH200(AH300)
AH2300(AH3200)
AH3000(AH3100)
A0H2300(AOH3100)
Founded in 1996,We have more than 16 years working experience in this field.