Pictures showcase A.OEM:
B.Product Display:
C.Application:
D. Factory gate :
E.producing department:
F. Production lines:
G. Automatic filling machine:
H. : Machine Check
I. Packing:
J. Loading container:
K. Express
L. Exhibition :Dubai
M: Customer Negotiations :
N.Customer Evaluation:
O. Certificate : supplier
Window mildew resistant silicone sealant Acetic & solidified; high intensity; fast solidification; good tightness; weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant Service Restriction:
The product is not applicable to structure assembly or project whose base material has a surface temperature above 40.
Use:
1. Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material Voluntary Standard: GB/T14683-2003 Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarantee.
Packing Specification: 245ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card; 190 kgs by drum; Optional Color: Black, white, transparent, grey or on requested.
Testing Standard: GB/T14683-2003 Silicone Building Sealant
NO. | Item | Data |
1 | Type | Acetoxy |
2 | Density g/cm3 | 0.98 |
3 | Capacity movement | ±30% |
4 | Skinning time | 5-15 minutes |
5 | Drying time(2mm/h) | 8-10 |
6 | Drying(4mm/h) | 18-22 |
7 | Max. Tensile strength | 1.3 |
8 | Hardness shore | 21±2 |
9 | Elongation at Break(%) | ≥500 |
10 | Modulus Mpa(100%) | 0.60 |
11 | Application temperature | -20 to +40 |
12 | Temperature resistance | -50 to +100 |
13 | adhesive | OK |
14 | Weatherproof | OK |
15 | Cold-hot adhesive | OK |
16 | Under water adhesive | OK |
17 | Elastic Recovery Ratio | 96 |
18 | Mass-loss Rate | 35 |
Skin drying time and fully drying time under: 23 and 50% humidity |
More pictures about products will be sent by e-mail! Datasheet will be sent by e-mail! Samples will be sent by courier! WE WILL DO BETTER THAN YOU EXPECTED!