1 / 5
Model No. : | TK119-3G |
---|---|
Brand Name : | KEELIN |
Type : | GPS Tracker |
Shenzhen, Guangdong, China
Product description
PRODUCT FEATURES:
■ GSM / WCDMA dual-mode 8-frequency, universal in the world.
■ Input voltage range: 6-36 V DC
■ Double Module,GPS & LBS positioning.
■ GPS precise positioning with A-GPS and uploaded by GPRS regularly, Supports real-time tracking and history track playback.
■ Supports ACC status checking and vehicle status notifying.
■ Built-in battery, Power disconnect alarm & Low battery alarm.
■ Built-in G-sensor ,Vibration, collision and falling alarm.
■ GEO-fence alarm, speed & shift alarm.
■ Use relay to remotely cut the oil
■ Extend I/O port to add extension function
■ Multiple protocol support, can be integrated to platform of customers
■ OTA upgrade firmware.
■ Water proof level IP67
PLATFORM/APP:
■ Real-time Tracking
■ Route Play Back
■ Cut Oil (Need Relay)
■ Vibration Alarm
■ Collision / Falling Alarm
■ Speed Alarm
■ Geo-fence Alarm
■ Power Disconnect Alarm
■ Low Battery Alarm
PRODUCT PICTURE:
Total schematic wiring terminal
4.2.1 Power cables and other interface for remote control
The standard input voltage of the terminal is 7V-72VDC, so please choose the our original power cables, the red cable is positive and the black cable is negative; Please ground the positive pole separately or ground it to ground connection, not to any other ground.
Connect the ACC cable (orange cable) to ACC switch of the vehicle, then the position server can get the information about the vehicle power; the ACC cable can also be connected directly to the positive pole of the vehicle power, then the position server think that the vehicle is always ignited.
Connect the 4# cable (yellow cable) to the 86 terminal(with small yellow cable) of the relay. Use cable ties to fix the relay to waterproof place, or use plastic bags to cover the relay..
4.3 Relay wiring
Relay wiring diagram shows how to wire the relay to control the fuel pump:
4.3.1 Connect the 85 terminal(with small white cable) to the positive pole of the vehicle power (+12V/+24V), connect the 86 terminal(with small yellow cable) to the 4# cable of the terminal.
4.3.2 Cut off the positive pole of the fuel pump, next serial connect the positive pole to the 87a terminal(with think green cable) of the relay, and connect another pole to 30 terminal(with think green cable), showing as in the figure.
Bottom of the relay Wiring Diagram
Notice: Be sure that the voltage of the vehicle power should match up to the working voltage of the relay, or the relay will be damaged.
Platform
You can choose Keelin terminal monitoring platform or download APP by phone. It is both designed by EELINK, we can position, real time tracking and playback on the platform server or app. Meanwhile you can use your own platform which can support multiple protocols.
Voltage |
12/ 24/ 36 VDC |
Work Current |
<30mA@12V |
Standby Current |
<10mA@12V |
GPS Accuracy |
5-15m (Depend GPS signal) |
LBS Accuracy |
About 200m (Depending on density of base stations) |
GPS Frequency |
1575MHz |
GSM Frequency |
850/900/1800/1900MHz |
WCDMA Frequency | W850/W1900/W2100MHz |
Hot/warm/cold Start |
<3s,<15s,<60s |
Battery Capacity |
70mAh |
Dimensions (mm) |
87(L)X41.6(W)X 12(H) |
Work Temperature |
-20℃~70℃ |
Work Humidity |
20%~80%RH |
Weight |
50 g |
IP Level | IP67 |
Accessories (Optional)
Relay
Shenzhen, Guangdong, China
Send your inquiry to this supplier