Wanrui hot sale water destilling machine for laboratory

Water distiller 

Technical Specifications

Voltage                     ~ 220V
Frequency                ~ 50Hz
Wire plug                  ~ GB 3 cores/EN 3 cores
Power                        ~ 750W
Distiller water           ~ 1.2L/H

Capacity                    ~ 4L
Product size             ~ 28*25*50cm
N.W                            ~ 4KG

PRODUCT CHARACTER：
1. Produce water under the safest and cleanest condition;
2. Stainless steel exterior and interior;
3. Operate easily: Add water and plug in the socket, then power will be shut down automatically after completion.
4. In small size, durable, light and handy: It's typically suitable for households, hotels, offices, traveling, medicine, chemistry purposes and so on.
5. It also has a special function of sea water desalination, which is of survival necessity to those areas in shortage of fresh water.
6. Effectively remove most tap water impurities.
7. High efficiency protector for overheating!
8. CE approved.
9. Design patent.

Instructions：
1. Please read the manual carefully before operation.
2. The distiller should work in dry and well-ventilated place.
3. Please use 220V outlet which is prohibited to work for a variety of appliances to avoid overload.
4. Please don't use broken power cord.
5. Don't use distiller during water injection, cleaning or inoperation.
6. Distiller can't be immersed in water.
7. Keep the distiller far from children in case of scald.
8. Do not remove the top cover until 10 minutes after finishing working in case of scald
9. Do not use steel wool (brush) or other hard object to scrape stainless steel chamber so as not to damage the surface or to be more easily stained with dirt.

IMPORTANT NOTES

PLEASE READ BEFORE USE AND FILE FOR FUTURE USE

Before Use

Unpack the water distiller and check all the components are present and undamaged. The box should contain:

1. Distiller 5. Filter

2. Water bottle 6. Main power wire

3. Discharge Cap 7. Chamber cleaning powder

4. Bottle Cap 8. Instruction Manual

Set up

1. Remove storage bottle from inside of water distiller

2. Fill tank inside of the machine’s body up to the highest water level line

be very careful not to overfill tank. (time needed to distill water can be

reduced by using already boiled water)

3. Place top cover onto machine’s body making sure the silicone seal is

correctly in place around the entire rim. Check to make sure the unit is

on a stable surface. Then connect power cord from the top cover into

the machine’s body.

4. Set up storage bottle as per diagram 1. Connect power cord to

power outlet.

5. Press ‘Starting Button”. The fan will come on automatically and the

tank will begin to heat, thus starting the distilling process.

6. Water will begin to drip into the storage bottle after approximately 30

minutes. It will take approximately 4 hours to distill 4 litres of water.

The unit will automatically shut down when the cycle has finished.

Please note: The unit must be allowed to cool down before starting another distillling cycle. (This will prevent injuries from scalding water and prolong the life of the Distiller).

7. Do not use the first bottle of distilled water. It will take one distilling

cycle for the unit to ‘self-clean/. Wipe out tank and rinse/discard water

in storage bottle. Distiller is now ready to create distilled water.

Please note:

* Use unit in a dry, well ventilated area.

* Keep the body of the unit dry - only fill with water using a jug

* ‘Start button’ will begin distilling cycle and unit will automatically turn

itself off when cycle is finished. To stop unit mid-cycle remove power

cord from socket.

* Leave power cord unconnected when unit is not in use.

* Do not immerse any part of the unit in water

* Do not remove cover whilst unit is mid-cycle. Wait until unit has

cooled down before removing top.

Cleaning

Rinse and wipe out tank everyday using clean water.

Calcification and scale will build up on bottom of the tank and should be removed every two weeks. Use following instructions:-

1. Pour in enough hot water to cover scale in the tank.

2. Pour 1-4 teaspoons into tank depending on the amount of scale.

3. Leave lid off unit and start up a cycle by pushing ‘start button’.

4. Let cycle run for 30 minutes, pour out water and wash the inside

of tank with clean water.

5. If scale is not completely removed repeat the process.

6. Replace filter in lid every 2-3 months.