Video
1 / 6
Brand Name : | JSHG |
---|---|
Height : | Customized |
Product description
High-voltage poles are typically used for projects that require higher levels of power, such as industrial or commercial developments, large construction sites, or infrastructure projects. The poles are designed to handle higher voltages and currents to meet the increased power demands of these projects.
Some common uses for UHP poles in the project include:
(1) Powering large machinery or equipment that requires a high level of electricity to operate efficiently.
2. Temporary power distribution systems to support construction sites or activities requiring large amounts of electricity.
3. Connect remote or off-grid locations to the grid to provide a reliable power supply to areas that may not have access to traditional power sources.
4. Support infrastructure projects such as street lighting, traffic signals, or telecommunications equipment that requires high levels of power.
When selecting an additional voltage pole for a project, it is important to consider factors such as the required voltage and current capacity, the type of construction materials required for the pole, and any specific safety or regulatory requirements that may apply. It is also important to work with a qualified power contractor or engineer to ensure that the poles are installed and maintained properly to ensure that the project is powered safely and reliably.
The construction of utility poles involves careful planning and engineering. They are designed to withstand various weather conditions, such as strong winds, heavy rain, and even earthquakes. The poles are usually set deep into the ground, providing stability and support for the wires and cables that are attached to them.
Type | Utility extra voltage electric poles for projects |
Shape | Octanganal,conical,polygonal,round,or columniform |
Material | Hot roll steel Q235/A36 ,minimum yield strength>=235n/mm2,Q345B/A572 minimum yield strength>=345n/mm2 ,As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490ST52 etc. |
Power | Normally 10-500KV |
Design Load in Kg |
300~ 1000 Kg appliced to 50cm from the to pole |
Surface treatment |
Hot dip galvanization |
Joint of Poles |
Insert mode ,inner flange mode ,face to face joint mode . |
Wind Speed |
160 Km/Hour . 30 m /s |
Thickness |
2 mm to 30 mm |
Welding |
We has past flaw testing.Internal and external double welding makes the welding beautiful in shape |
Video
Send your inquiry to this supplier