Ultrahigh Frequency Induction Heating Machine UF-06A

Main specification:
1. Model: UF-06A-I/ UF-06A-II/ UF-AB-III
2. Maximum input power: UF-06A-I: 6.6KW; UF-06A-II: 6.6KW; UF-06AB-III: 6.6KW
3. Oscillatging frequency: UF-06A-I: 100-500kHz; UF-06A-II: 200-700kHz; UF-06AB-III: 0.4 -1.1MHz
4. Input voltage: 220V, single phase, 50Hz or 60Hz
5. Maximum input current: 30A
6. Duty cycle: 100%
7. Cooling water desire: 3L/min 0.2Mpa
8. Water temperature protection point: 9. Auto heating time, retaining time: 0.1-99.9Sec.
10. Weight and size:
Model N. W. / G. W. (kg) Size (L xW xH) packing size
UF-06A-I 22kg/27kg 580x260x500mm 680x360x600mm
UF-06A-II 22kg/27kg 580x260x500mm 680x360x600mm
UF-06A-III controller 18kg/23kg 520x240x500mm 620x340x600mm
UF-06A-III transformer 2kg/7kg 140x140x96mm 240x240x106mm

Features:
1. with high frequency up to 500kHz-1.1MHz, the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
2. IGBT and inverting technologies of third generation been used; Higher reliability and lower maintenace cost.
3.100% duty cycle, continuous working is allowed at maximum power output.
4. Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5. Display of heating power and heating current and oscillating frequency.
6. Simple to install, installation can be done by unprofessional person very easily;
7. Light weight, 24KG only;
8. Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

Applications:
Brazing of the tools
Quenching of the saw tip
Shaping of the small driller
Brazing of the saw tip
etc.