Temperature And Humidity Test Chamber

Temperature And Humidity Test Chamber

Technical Parameter

Type		WT-H  80A	WT-H  150A		WT-H  416A	WT-H  800A		WT-H  80B	WT-H  150B		WT-H  416B		WT-H  800B		WT-H  80C	WT-H  150C		WT-H  416C	WT-H  800C	WT-H  150D	AHL  -416D		WT-H  800D
Inside Dimension mm	W	400	500		700	1000		400	500		700		1000		400	500		700	1000	500	700		1000
	H	500	600		850	1000		500	600		850		1000		500	600		850	1000	600	850		1000
	D	400	500		700	800		400	500		700		800		400	500		700	800	500	700		800
Outside Dimension mm	W	930	1030		1230	1530		930	1030		1230		1530		930	1030		1230	1530	1030	1230		1530
	H	1310	1410		1660	1810		1310	1410		1660		1810		1310	1410		1660	1810	1410	1660		1810
	D	810	910		1210	1310		810	910		1210		1310		810	910		1210	1310	910	1210		1310
Volume L		80	150		416	800		80	150		416		800		80	150		416	800	150	416		800
Temperature range		0℃~100℃(150℃)					-20℃~100℃(150℃)								-40℃~100℃(150℃)					-70℃~100℃(150℃)
The evenness of  Humiture distribution		±0.5℃   ±3%RH		±1℃  ±5%			±0.5℃  ±3%RH					±1℃  ±5%			±0.5℃   ±3%RH		±1℃  ±5%			±0.5℃   ±3%RH		±1℃  ±5%
Temperature rising speed		0℃~100℃about20min					-20℃~100℃about35min								-40℃~100℃about40min					-70℃~100℃about60min
Temperature falling speed		20℃~0℃about20min					20℃~-20℃about45min								20℃~-40℃about60min					20℃~-70℃about90min
Freezing system		one-dimensional fully sealed air cooling system													two-dimensional fully sealed air cooling system					three-dimensional fully sealed air cooling system
Humidity range		20%~99%RH								humiture stability					±0.2℃ ±2%RH
Humiture adjustment		the modes of balancing temperature and humidity adjustment								outside materials					stainless steel sus # 304
Inside materials		stainless steel sus # 304								humidifying system					surface evaporation, humidifier with stainless steel heating and equipped with a power off device when humidifier wants water and an over-temperature protection device.
Thermal material		heat preserved by rock wool and hardened pu  foaming								heating system					heater with stainless steel dissipation
Circulatory system		convection by fan forced circulatory system								dehumidifying system					freezing dehumidifying system
Water supplying  system		The advance water tank, fully automatic water supplying control, device for reuse through recovery and circulatory filtering plus a warning device  for insufficient water.
Safety devices		leakage and overload protection device, compressor overload protection device, power off device for over-temperature and over humidity, water insufficient protection device, over-temperature protection device for humidifier and the protection device for limit of temperature.
Standard accessories		Two sets of the adjustable SS plate, the vacuum glass windows, the test hole, a lamp inside the operation room and a movable indicator.
Options		Recorder								Power				AC220V.1PH.50/60HZ

 

Characteristics:

The construction of the machine is humanized in practical use with its perfect and beautiful contour. It is elegant for its round corner design plus the treatment of ripple on the surface of stainless

steel. The rotating door clamps have the function of air tightness and the advance water supplying tank saves the space and also make it easy and practical for use. The used water recycle device

and filter for water reuse will save the water consumed. The systems of temperature rising, falling, humidity increasing and freezing dehumidification are all completely separated so tests can be

performed respectively in high, low and constant temperature.

Micro computer high precision humiture control system with touch control temperature control humiture controller-humiture control system with PID automatic calculating microprocessor will write

temperature and humidity the test required in the memory of the system

Alarm buzzer alarms for ten seconds when test finished.

Emergency stop used to switch off the machine emergently when running.

Total timer Timer ---ser range0-999hr the unit for minutes seconds can be set by switchover

Water sup; over-temp; over-humi; rotor; cooling3; cooling2; cooling1; humidify; heating control indicator warning indicator

Rotor; cooling3; cooling2; humidistat; light, timer; cooling1; power control switch

Characteristics of the programmable thermostat and humidistat test machine:

This machine has the same advantages as the standard, besides, it can simulate various various environments of high temperature, high temperature with low humidity, low temperature with high

humidity, low temperature with low humidity and low temperature by means of the high stable platinum temperature sensor coordinated the circulatory system of the forced fan which meets the

requirement of temperature and humidity. We supply many kinds of controllers to the users. The touch-screen in series of HONEYWELL-1PC-1000and TEM1-880,770,850,550are widely used in the

field of temperature and humidity and when linked to the computer it can offer the changing Curves of the humiture required by the user, It has the function for programming ,different languages

choosing and remote controlling.

mainly produce and supplys the following products:Aging Test Chamber/Burn In Room/Combined Test Chamber/Condensate Test Chamber/Drying Oven/Dust Test Chamber/Electromagnetic Vibration Test Bench/High & Low Temperature Chamber/Rapid temperature change test Chamber/Salt Spray Test Chamber/Sulfur dioxide test chamber/Tensile Test Machine/Thermal Shock Chamber/Thermostat And Humidistat Test Chamber/Walk in temperaturehumidity Chamber, and so on.