SZ-3TR Desktop cold welding machine / weld copper wire or aluminum wire without using power, cable machinery
1. Application: Widely used in the cold welding for the wire of copper, aluminum, gold, silver, nickel, and other non-ferrous metal wire/rod.
2. Welding Range of the wire: Copper: 0.70mm-4.5mm
Aluminium: 0.70mm-6.0mm
3. Structure: Precise Moulding(spheroidal graphite cast iron QT-600-3
4. Advantage: No power, no heat, no electricity, light, easy to operate, welding just one minute. 5. Overall dimensions: 300mm* 190mm × 290mm (L*W*H)
6. Material of mould: Integral casting/moulding 7.Weight:37KG Brief description: 1. Weld copper wire or aluminum wire; or weld copper wire with aluminum wire 2. No need any power, heat, only match corresponding dies. 3. Our machine can weld copper wire from 0.06mm-10.0mm; weld aluminum wire: from 0.06mm-15.0mm. 4. You can choose suitable machine according the wire diameter you need to weld and our machine's welding range. 5. For example, if you want to weld 0.90mm, 1.0mm, 1.20mm, 1.40mm copper wire, you can choose model SZ-3T, SZ-3TR. It should make four single cavity dies or two double cavity dies. 6. Our machine is compatibility with other supplier’s welders. You can use others’ welding machine with our dies; or use our dies on other supplier’s machine. 7. The tolerance of dies to wire: -1%mm+ 3%mm wire to dies tolerance. For example: 2.0mm dies can weld the wire diameter from: 1.98mm to 2.06mm wires. 8. Can different metals be welded using cold pressure? Cold welding can be used to join dissimilar materials, such as aluminum to copper. 9. It can weld following wires: copper wire ( purple copper wire, brass wire, including round wire or flat wire, square wire); aluminum wire. Plastic wire and other wires should remove surface insulation part, then welding. Steel wire can’t be welded. You can choose the suitable machine according to follow Welding Range
Model | Operating | Copper wire range | Aluimnum wire range |
SZ-1A | hand clamp / manual | 0.06mm-0.50mm | 0.06mm-0.50mm |
SZ-1B | hand clamp / manual | 0.12mm-0.60mm | 0.12mm-0.65mm |
SZ-2S | hand clamp / manual | 0.30mm-1.00mm | 0.30mm-1.30mm |
SZ-2T | benchtop / manual | 0.30mm-1.30mm | 0.30mm-1.50mm |
SZ-3T | benchtop / manual | 0.80mm-4.00mm | 0.80mm-5.50mm |
SZ-3TR | benchtop / manual | 0.70mm-4.50mm | 0.70mm-6.00mm |
SZ-107 | hydraulic / automatic | 1.50mm-6.8mm | 1.50mm-9.5mm |
SZ-158 | hydraulic / automatic | 3.0mm-10.0mm | 3.0mm-15.0mm |
Machine picture & dies pictures:
Welding process:
Welding test:
Welding process pictures: 1. Install the dies:
2. Adjust the centre hole:
3. Thread the wire, into the machine:
4. Weld the wires, by squeeze the machine's handle:
5. Clean the flash:
Contact Information: (MISS) Lana Wei Shanghai Shengzao Mechanical & Electrical Equipment Co., ltd Tel: +86-021-52697550 Mobile:+86-13761084602 (whatsapp) Skype:lanalana0562 Website: www.szlenghan.com www.shshengzao.com