Stainless steel pleated melt filter element

Specifications 1.Stainless steel water filter element

2.Porous sintered construction

3.High mechanical stability

4.ISO Test

Stainless steel melt filter element Overcome the temperature and compatibility limitations of fabric or synthetic fiber cartridges by replacing them with these stainless steel wire cloth elements. They are good up to 500°F instead of the usual 250°F and they are unaffected by most caustic fluids. Made entirely of 304 or 316 stainless steel, they are cleanable and reusable,and can withstand differential pressures up to 60 psi. You can choose particle retention ratings as fine as 5 microns. Element surfaces can be plain cylindrical, or pleated to increase surface area. Pleated units rated 100 microns or finer have an underlying support layer of coarser mesh to prevent pleat collapse. Fabrication is by welding and crimping. Epoxy bonding can also be provided.   Specification 1) Material: Main filter media of filter cartridge are stainless steel sintered fiber web and stainless steel weaving wire mesh. 
2) Filter rating: Filter rating range from 0.5 to 500 microns are availlable.
3) The sizes is available at customer's requirement. 
4) Operating medium: High molecular polymer, drug, hydraulic oil, water treatment, hot gas, food and beverage etc   Features Good strength, fastness, easy cleaning, high temperature resistance. 
High porosity, large filter area and good dirt holding capacity
Can be used repeatly after chemical cleaning
Also have air filter, hydraulic filter, filter element ect