The pump head and motor are integrated, and the brushless driver is integrated in the motor tail, which makes the product structure compact and more suitable for the occasions with narrow installation space.

Product Model Selection Instruction：

Pump Head			Motor
I	0.07	S	40W
"I" means the Integrated Structure	Pump revolution, Unit: ml/rev, note ① for details	Pump body materials, note ② details	Motor type and Power

Notes:

1. Pump output volume: 0.07,0.15,0.3,0.6,0.9,1.5,3.0,6.,12.0 (Unit: ml/rev)

2."S" means pump body material is 316L, gear and shaft sleeve are PEEK, seal with PTFE, the rest others are 316L.

   "T" means pump body material is 316L, gear and shaft are Tungsten steel, shaft sleeve is PEEK, seal with PTFE, the rest others are 316L.

  "P" means pump body material is PPS, gear materail and shaft sleeve are PEEK, seal with FFKM, the rest others are Hastelloy.

  "H" means the pump body materials is Hastelloy, the gear and shaft sleeve is PEEK, the seal materials is PTFE, the rest of the pump flow material is Hastelloy, the appearance and size is same as 316L pump, details product parameters refer to 316L pump head.

Product Model : I0.60S40W

Product Diagram:

Product Parameters:

Pump Model	Motor Type	L1（mm）	L2（mm）	Pressure（bar)	Weight(kg)	Rated Current（A）	Imp.&Exp. Size	Flow（L/H）
I0.07S	40W	93.1	30.5	8	0.77	2.5	G1/8	2.1～18.9
I0.15S		95.4	32.8		0.77			4.5～45
I0.30S		95.4	32.8		0.77			9～90
I0.60S		95.8	36.9	4	0.78			18～180
	70W	108.1	36.9	8	0.93	3.3		18～180
I0.90S		113.1	41.9	4	0.94			27～270

Pump Head Parameters		Motor Parameters		Motor wiring definition
Fluid Viscosity	0.2-1500cps	Drive Type	Built in drive DC brushless	Red	+24V
AAmbient TemperAture	-40℃-70℃	Rated Voltage	24V	Black	0
Static sealing	PTFE	Speed regulating voltage	0-5 (0.35V ON 0.3V OFF)	Brown	Speed control signal 0-5V input
Pump Body	316L	Speed rpm	500-5000rpm
Gear	PEEK、316L	Working system	Continuous	Blue	square wave, 2 pulses per

 The values in this table are for reference only.

 

Remarks:
OEM service are avaiable according to your request.
The specifications are only for reference, for details checking, please feel free to contact us.

Pump head structure diagram:

1. Inner-hexagon screw*3      5.  Pump body               9.  Rear cover       13.  Countersunk head screw*3

2. Front cover                      6.  Tef/lon gasket*2        10.  O-ring              14.  Isolation cover

3. Shaft sleeve*6                 7.  Driving gear              11.  Platen 

4. Pin*2                              8.  Driven gear              12.  Internal magnetic steel

Product characteristic diagram:

40W Motor Instruction

Motor parameter

（Number of phase）	N	3
（Rated Voltage）	VDC	24（8-30VDC）
（Rated Power）	W	40W
（Speed regulating voltage）	VDC	0-5   (0.35V ON   0.3V OFF)
（Range of speeds）	RPM	500-5000
（Maximum current）	A	2.2A
（Instantaneous protection current）	A	5A

Wiring instructions

Red	+24VDC
Black	GND
Brown	Speed control signal 0-5V input
Blue	5V level, square wave, 2 pulses per revolution

Secure features

Operation protection: when the motor running current reaches the limit current of 2.2A, the motor drive  will start the protection and stop running.

 

Locked rotor protection: when the pump body is locked, the drive will start the protection function and  cut off the internal power supply of the motor.

Software / hardware over-current protection: when the system detects that the instantaneous current of software and hardware inside the motor is greater than 5a, the drive will start the protection.

 

Hall error protection: when the motor Hall sensor failure, the motor will start protection stop running, to prevent burning the motor.

 

Under voltage protection: when the operating voltage is lower than the specified range, it will stop operation.

Performance data

Note:The valve door is fully opened and tested under no-load condition

Note:The valve door is blocked and tested under full load conditio