Speednt UK6600-32HC high exchange capacity and based layers 10G switches for ethernet network

Product Description   Speednt UK6600-32HC high exchange capacity and based layers 10G switches for ethernet network      10Gigabit Data Center Switch UK6600-32HC is a layer 2 + non-blocking switches. 650Gbps switch capacity, industry the highest performance (1U TOR); With 960Mpps forwarding performance, L2 / L3 forward full speed; Extensible 32 biggest 10G interface, the highest density (1U TOR), meet the demand of high-density 10G server access. Extensible 2 high-performance QSFP+ interface, 40G QSFP+ interface allows for 4 to 10GE interface; Also can be extended 8 10G electric ports; Provide flexible network capacity; Ensure the stable operation of the network and link load balancing.UK6600-32HC adopts modular design, provides 24 10GE SFP+ ports, 4 1000M combo ports, 1 Console port:1 OOB management. To gather and core data exchange to provide enough bandwidth, the user can according to demand to choose the appropriate 10G port in a flexible response network requirements. With high bandwidth and low latency, pipe network. UK6600-32HC switches located in density of the next generation of data center and cloud computing network access, can also be used for large Internet cafes, the core of enterprise network, metropolitan area network, or gathering.
High density 10G access, performance is remarkable
(1)With 650Gbps backplane bandwidth, the industry the highest performance (1U TOR);
(2)The layer 3 switching hardware routing, wire speed packet rate reached 483.6Mpps, L2 / L3 forward full speed;
(3)Extensible 32 biggest 10GE interface, the highest density (1U TOR), meet the demand of high-density 10G server access.
(4)Extensible 2 high-performance 40G QSFP+ interface, 40G QSFP+ interface allows for 4 to 10GE interface; Provide flexible network capacity;
(5)Extensible 8 10G electric ports, provide flexible network capacity;
(6)Has 4 1G photoelectric reuse ports, industry the only high density 10G switches provide more 1G port access.
Wind direction flexible choice, green and energy saving
(1)Flexible/before and after the first air duct design;
(2)Adopt strict before and after air duct design and support the hot and cold air duct is completely isolated, improve heat efficiency, satisfies the requirement of data center computer room design;
(3)Through selecting fan and power supply module, flexible support before, during and after the first air duct;
(4)Support power supply and fan redundancy configuration, ensure continuous business operation;
(5)Innovative energy-saving technology: using the latest energy-saving chip, fan speed control scheme of intelligent, supports real-time detection power consumption, reduce operational cost for the customer, create green data center.
Convenient in operation and maintenance
(1)Management support with Web,SNMP and telnet;
(2)Support XModem protocol,use TFTP/ZMODEM to software upgrading and BootRom upgrading;
(3)support SFP+, also backwards compatible XFP;
(4)To provide redundant power supplies, quick failover and fast connection, greatly increase the system reliability.  

Extensible port	extensible 8 10GE SFP+ ports or 8 10GBase-T ports or 2 40G QSFP+ ports
Console port	1
Management port	1
Backplane Bandwidth	650Gbps
Forwarding rate	483.6Mpps
Jumbo frames	9216 bytes
Transfer mode	Support store-forward mode and cut-through mode
IPv4/IPv6 route	6k/8k
MAC address table	128K
Packet Buffer	9MB
VLAN ID	4K
Flash memory capacity	32MB
memory capacity	1GB DDR3 SDRAM
CPU	PPC Dual-core
Soft Specification
security feature	IP+MAC+PORT+VLAN binding
	ARP inspection
	DoS defend
	port protect
	IP Source Guard binding
VLAN	Port based VLAN
	802.1Q VLAN
	IP based VLAN
	MAC based VLAN
MAC address table	static MAC address table
	dynamic MAC address table
Storm Control	Broadcast Limit
	Multicast Limit
	DLF Limit
	Limit Speed
Traffic Control	Half-duplex control based on the back pressure type
	Full-duplex control based on the PAUSE frame
Port Mirror	Support port mirror
Port management	system info
	port Statistics
	config port
	port trunk
	port-isolate
QoS	IEEE 802.1Q Congestion mechanism
	Each port has 8 send queue mapping to 8 802.1p priority
IP services	Ping dectection
	DHCP Snooping
Spanning Tree Protocol	MSTP(802.1s),STP,RSTP
Multicast management	IGMP Snooping frame
System management	Support SNMP v1/v2/v3
	Support Console
	Support TELNET
	Support WEB
Remote Upgrade	Web  host
Physical Characteristics
External Dimension	440mm*473mm*44mm
Power Supply Features	AC:90V~290V

Certifications   Packaging & Shipping Packaging: New, unused,undamaged in its original packaging (Paper Packaging)
Shipping: DHL, 100% tested before shipment
Delivery Time: 1-3 working days after receiving payment Company Information ShenZhen Speed Technology Co., Ltd, founded in 1997, is a high-tech enterprise which specializes in the manufacture of professional and reliable network equipment, undergoing its own research,development,manufacturing and selling & after sales services. At present, Speed Technology products are widely used in telecommunication, broadcasting, community access, monitor and other industries, recognized by many customer in a variety of LAN constructions such as enterprises, hospitals, schools, internet cafes and so on. In 2005, firstly introduced the full Gigabit switches with 24 eletricity ports and 2 optical ports, laid a good foundation of development of "fiber backbone". In 2008, firstly manufactured the second layer gigabit switches with optical ports, became the pioneer of promoting gigabit fiber network, and successfully introduced the fiber backbone solutions of LAN with higher cost-effective and stable performance, for the coming of gigabit fiber era wrote a great deal! In 2012, firstly introduced full 10GE fiber backbone switch, leading the era of the local "full 10Gb fiber backbone" ! And laid a good foundation of development of "10G fiber" times. Contact Information Shenzhen Speed Technology CO., LTD Website: www.speednt.com E-mail: fta (at) speednt.com Whatsapp: +86 138 2673 7067 Skype: winnahxl Wechat: HXL_XQ