soft and low impact surface rubber paver perfect for gymnasiums, play areas, and other high-activity areas

Rubber Paver Tiles

Sizes:

300*300mm

500*500mm

610*610mm

1m*1m

Description - Rubber pavers give you a long lasting, comfortable, and slip resistant replacement to the hard surfaces once found in the stables from years ago. Rubber pavers are the new choice in flooring for breeding stables across the country. These pavers are easy to install and are virtually maintenance free while being offered in 3 beautiful equestrian colors. Rubber pavers provide your valuable investment with a safe, comfortable, slip resistant surface in both dry and wet conditions. Also feel pride in purchasing these rubber pavers knowing that they are made in the USA!

Material – Our rubber pavers are made from 100% high-quality recycled SBR tire rubber.

Recommended Uses – These rubber pavers have been used successfully in barn stalls, corridors, wash bays, saddling areas, breeding sheds, paddock areas, tunnels, horse paths, winners' circles, as well as parade areas and service roads. Rubber pavers are the number one flooring choice in breeding barns across the country!

Description and advantage:

• The environmentally friendly rubber pavers are UV stabilised & manufactured from high grade recycled rubber.

• With a masonary look they will look great in your outdoor entertaining area as they come in four different colours with a smooth surface making them easy to clean and maintain.

• Pavers can be glued onto existing surfaces such as concrete, timber etc...

• Pavers come with an inclusive two year guarantee, against discolouration, shrinkage and any other manufacturing fault.

• Available in Black, Terracotta, Green and Speckled Black. Speckles are 100% EPDM on black rubber tiles.

Dog-Bone:

16-Grids

Interlocking

Shock absorbing

Colorful Speckles

RUBBER PAVERS APPLICATIONS

The versatility of rubber pavers as flooring solutions is beyond question. They can be used in different areas in homes and commercial properties. Accordingly, these are just some of the applications of these paving materials:

Residential

• Pool decks
• Walkways
• Patios
• Garages
• Indoor and outdoor kitchen
• Bathrooms
• Hallways
• Living rooms
• Balconies
• Play areas
• Verandas

Commercial

• Sports arenas
• Gymnasiums
• Playgrounds
• Nursing homes
• Child care facilities
• Supermarket aisles
• Showrooms

How to Install Rubber Pavers
Rubber pavers are constructed from recycled tires and are used in schools, businesses and homes. Because these pavers are slip-resistant and shock-absorbent, they are very safe for your family. Rubber pavers are also wear-resistant. Depending on the size of your project, you can complete the rubber paver installation in just a day or two.

Instructions
1. Measure and mark the pathway in your yard using a tape measure and chalk spray. Dig up the grass or dirt in the area to the depth of the pavers plus four inches with your shovel. Use your level to align the area and tamp it down with your tamper. Edge the area with a border of 4-inch by 6-inch treated boards.

2. Shovel a 3-inch layer of crushed stone into the area and tamp it down with the tamper. Shovel in a 1-inch layer of sand and tamp it down with your tamper. Spread filter cloth over the top of the sand and tamp it down. Attach the outer edges of the filter cloth to the treated wood border with your staple gun.

3. Use a 1/8-inch trowel to spread adhesive onto the back of your first paver. Align the paver against the top corner of the treated board then press it down firmly onto the filter cloth to begin the first row. Tap the paver into place with your rubber mallet and continue the paver installation to the end of the first row. Use your utility knife to trim the last paver in the row if it does not fit.

4. Use your utility knife to cut enough rubber pavers in half to stagger every other row. Apply adhesive to the half paver for the second row and tap it into place with your rubber mallet. Complete the paver installation for the second row. Continue the installation process to complete all the consecutive rows in the same staggered pattern until your pathway is complete.

5. Squeeze beads of polyurethane caulking into any gaps between the pavers. Wipe off excess adhesive immediately from the rubber pavers with a few drops of mineral spirits on a cloth. Allow a few days for the rubber pavers to cure before washing them with water.