SMD 5050 Flexible LED Strips

Product Description

1. Indoor installation: LED strip lights for indoor installation is relatively simple, since it is unnecessary to withstand wind and rain. Stickers can tear when installing strip lights on the back of 3M double-sided adhesive surface, and then the strip lights need to be installed fixed in place by flat enough. If you encounter a corner too short or too long strip lights, LED strip lights can be used alone or welding of any cut for the tangent of each group identified with scissors.

 2. Outdoor installation: outdoor installation due will withstand wind and rain, can not use 3M adhesive fixed, so often used for outdoor installation slot fixed way, you need to cut and local connections, indoor installation method and the same, but need additionally equipped with waterproof glue to consolidate the connection point waterproof effect.

3. Power Connection method: LED Symphony of strip lights with general voltage DC DC5V, so need to use switching power supply, the size of the power supply according to the power and the connection length LED lights to be.

4. Controller Connection: LED ticker tape and RGB strip lights all need to use the controller to achieve with changing effects, and control the distance of each controller is different, general , Simple controllers` control the distance is 10-15 m , the remote controllers` control distance is 15-20 meters, the longest can control up to 30 meters away. If the LED strip lights with connection distance is longer, but the controller can not control so long strip lights, then you need to use the power amplifier to tap.

Product Characteristics

Available IC:  WS2801, WS2811, WS2812, APA102, APA104, LPD8806,LPD6803,UCS1903 etc, with 30/32/48/60/96/144 LED per meter

Addressable full color led strips(ws2812b) --WS2811 IC built-in 5050 RGB LED chip.

Individually control -- 1 IC & 1 LED chip.

Standard Reel Lengt: 5meter/roll, also can be customized.

Cutted:  1 integrated RGB LEDs per segment, can be cutted per 1LED.

Sticky:  with 3M adhesive on back side for sticky.

                screw+silicon clip, or 3M adhesive back side.

Type:        waterproof--white pcb ;  non-waterproof--white pcb;

                waterproof--black pcb ;   non-waterproof--black pcb