Slim Portable Jump Starter with 200A Starting Current

MF09A Slim Portable Jump Starter with 200A Starting Current
I: Features
1. Jump starting for 12V cars, motorcycles, boats, etc.
2. Slim design, with the dimension of 140*77*17mm.
3. Charging for mobile phones, tablet PCs or other electronic products
4. LED Flash Light with the modes of on, strobe and SOS
II: Technical Parameters
Battery capacity: 6500mAh
Output: 12V car start port; 5V=2A
Input: 13V=1A
Full charging time: Approx. 3 hours
Starting current: 200A
Operating temperature: -15º C - 60º C
Size: 140*77*17mm
III: Operating instructions
A. Charging for the device
Use home charger or car charger to charge for the device.
B. Start for 12V vehicles
1. Make sure the power capacity is more than 75%.
2. Connect the red clamp to the anode (+) of vehicle's battery and the black clamp to the cathode (-).
3. Insert the other end of the clamps into 12V car start port of the device, and switch on the device.
4. Turn the key to "ON" and start the vehicle.
5. Once the vehicle is started, remove the clamps from the vehicle's battery within 30 seconds and then the other end of the clamps from the car start port of the device.
C. LED Flash Light
Long press the switch button to turn on the LED flash light. There are 4 corresponding modes: On, Strobe, SOS and Off.