slag pot in cast steel

Specifications Slag pot in cast teel:

1.Low alloy cast steel ASTM, BS, DIN standard.

2. With or without trunnion.

3. Volume:5-30M3

Slag pot is a load-bearing device whose sole purpose is to collect molten or solid slag generated during metallurgical or chemical processes, to retain it during transport and to deposit it at a place of disposal.  1. Material   Cast Steels with differing chemical compositions but defined mechanical properties play a dominant role in the manufacture of slag pots. Standard specifications of Cast Steel for slag pots may be found here:

Country	Specification	Grade
United Kingdom	BS 3100:1991	425-A2
USA	ASTM A27	60-30
Germany	DIN 17182	GS16Mn5
Japan	JIS G7821:2000	SC42
International	ISO 3755:1991

  2. Mechanical properties for Cast Steel slag pots are given below:

	USA(MPA)	Europe (MPA)
Tensile strength	>414	>448
Yield strength	>207	>241
Elongation	>24	>35
Reduction of area	>35	>40

  3.Types

Name	Dimension	Weight	Filled volume
Round Slagpot	4.440 x 3.700 x 3.050	26Ton	17CBM
Round Slagpot	5.100 x 3.260 x 3.500	33Ton	16CBM
Round Slagpot	5.350 x 4.150 x 3.250	34.3Ton	23CBM
Round Slagpot	5.200 x 4.040 x 3.050	32Ton	20CBM
Round Slagpot	4.660 x 3.600 x 3.200	26Ton	16.4CBM
Oval Slagpot	4.700 x 3.890/5.180 x 3.120	40Ton	25.5CBM
Oval Slagpot	4.065 x 3.430/4.450 x 3.050	30Ton	19CBM
Round Slagpot	5.250 x 4.400 x 3.000	34.5Ton	18CBM
Oval Slagpot	3.990x4.075x2.680	21.5Ton	16CBM
Round Slagpot	4.825x4.240x3.275	38Ton	23CBM
Oval Slagpot	5.840x6.004x3.900	60Ton	45CBM
Round Slagpot	5.02x4.58x3.15	40Ton	28CBM
Oval Slagpot	4.29x3.61x3.48	35Ton	21.4CBM
Oval Slagpot	3.245x3.8x2.85	19Ton	14CBM
Petals rim Slagpot	3.4x3x2.374	13.5Ton	6.2CBM
Oval Slagpot	2.71x2.3x2.275	9Ton	6CBM

  4.Delivery condition: normalized  5.Quality assurance  The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.
The standard documentation ensures the full traceability of every process step:
Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition,
Mechanical properties and non-destructive examination;
Dimensional check supported with a “as-built“ sketch;
Record of the quality heat treatment;