Silver Case Accurate Tourbillion Mechanical Watch , Automatic Watch

 Silver Case Accurate Tourbillion Mechanical Watch , Automatic Watch
 
 
Quick Detail:
Gent Golden Case Black Dial Men Wristwatch Tourbillion Mechanical Watch
 
 
Description:
 

Type	Automatic Mechanical Movement
Case Material	Stainless Steel
Function & Detail	-hours, minutes -Light rose golden case and hands -Dial scale function design -Arabic numeral display -Subsidiary seconds (day of week, date, date, months & years) -Tourbillion cage at the 6 o’clock
Watch Back	The case back is see-through design
Watch color	-case: light rose golden -straps/dial: black/white
Case Thickness	13.5mm/1.9inch
Strap length (included the case)	242mm/9.528inch
Strap width	23.76mm/0.935inch
weight	About 80g
Water Resistant	NO

 

Suggestions of using mechanical watch:

 

1. Manual winding movement of the watch should be winding once a day at the same time, to ensure there is enough energy to operate the watch within the next 24 hours.
2. Automatic movement of the watch, the energy from the movement of the wearer?s arm. So you don?t need to manual winding the watch under the normal case. It may need to manual winding because of wearer?s physical-activity energy is not enough to operate the watch. Please take a control that turn the crown less than 20 laps.
3. Having not been worn more than 40 hours of automatic watch, should turn the crown 20 laps to re-start the movement of drive system before wearing again.
4. To prevent to ingress of the moisture to the watch case and keep waterproof performance, make sure the crown is always in a locked state.

 

How to Set the time: ( Hand wind mechanical watch)

 

1. Twist the time adjust button clockwise( be careful and gentle) to full spring (about 20-25times) for the first use;
2. Stop after the spring is full, to avoid bar or screw be broken inside;
3. Pull out the button again to set the time.
4. Full spring (20-25times) once a day to ensure travel time required to the next 24hours.

 

How to Set the time: (automatic mechanical watch)

 

1. Twist the time adjust button clockwise( be careful and gentle) to full spring (about 20-25times) for the first use;
2. Put the watch on the horizontal states and swing the watch for couple minutes before you wear it.
3. Pull out the button again to set the time.
4. Automatic mechanical watch requires the user wear it every day, do with proper amount of movement enable the bar to keep running, it’s normal become slow if the user has less activity on it.

 

(Noted: if you wear it often and shake your wrist once for a while, it will keep working. But if you put it aside for a while especially when you put it on the table before going to the bad, it probably stop working after a few minutes. In this case, I kindly suggest you to wind it up clockwise for about 20-25times before you going to the bed, so that it could keep running you get up at the next morning. )

 

Our service:

To help customer enlarge their business, we cooperate with many watch manufacturer, dealing with mechanical watch, digital watch and different kind of quartz watch, in order offer a competitor price, and we only cooperate with factory.
 

leather band wristwatch, leather band automatic watch, tourbillon wrist watch