Show/Display Large Current

Triangle Even Numbers Show/Display Large Current Step-down   Transformer     Specifications:

² Input Voltage: 6-13V

² Output Voltage: 4.8-9.6V( default voltage: 5.2V)

² Output Current: 0-15A (Max. 20A)

² Dimension: 65*27*35mm

² Weight: 60g

Features:

² Use high definition nixie tube, number will still clearly visible even in the sunshine.

² Short for Onboard equipment, integration in electronic switch, voltage input and output display and large current UBEC.

² Three-position nixie tube displays input and output voltage timely, assist you to get know the power supply status in the first time.

² Output voltage: 4.8-9.6V, suitable for all kinds of high and low voltage servos and receivers in market.

² Large output current: 15 A (MAX.20A), beneficial to provide continuous sufficient operating current for servo.

² Working voltage: 6-13V, applicable to get power from Lipo, Ni-MH, Ni-Cd, A123 Li-Fe and other batteries directly.

² If powered off suddenly while operating, it will keep outputting voltage normally when powered on.

Use Method:

² Long press on red button for 2 seconds to start. (Indicator light shows long time, nixie tube prompts inputting voltage after 3   seconds; Indicator light flashes, nixie tube prompts outputting voltage after 3 seconds.)

² Long press on red button for 2 seconds to turn off.

² On state, short press on red button to switch to output voltage (red indicator light flashes); Short press on red button again to   switch to input voltage (red indicator light shows); Voltage will calculatedly show if short press again.

² If need to adjust the output voltage, short press on red button to switch to output voltage. Use a Straight screwdriver to adjust   the potentiometer at the tail of the step-down transformer. Counterclockwise rotation for output voltage value decrease and   clockwise rotation for output voltage value increase.

Kindly Remark:

² Battery negative and positive pole are not allowed to be connected in an opposite way.

² Not allowed to be exposure to oil or water, even exposed to something corrosive when installation.

² Pay attention to air ventilation when using large power.

² Kindly suggest using high quality batteries to supply power, bad batteries will impact the stability of power supply and even   lose control caused by power shortage.