There are a lot of Gold Concentrating Equipment which can be used for the gold processing plant, usually there has three categories: first is gravity gold processing plant, second is flotation gold processing plant, and the third is with CIP or CIL gold processing plant, the gravity gold processing plant is mainly used for alluvial gold ore, the main equipment is gold wash trommel, shaking table, and for the flotation gold processing plant, the flotation machine works as the main gold concentrating equipment, Mingyuan can provide good shaking table price and the complete gold processing plant, besides we can provide quality gold shaker for sale.

Gold Shakers or Gold Shaking Table refers the shaking table used for alluvial gold ore washing plant, which is a simple and cost effective gold wash plant, the main equipment for a gold wash plant are gold washing trommel, jig machine, Gold Mining Shaker Table, centrifugal concentrator, sluice, and so on. besides the gold ore, the shaking table can also be used for the other kinds of ores, such as tin, chromite, manganese, etc. it can be also called Chromite Shaking Table when it is used for chrome ore processing plant. Mingyuan can provide different gold shakers for sale,  such as single deck gold shaking table, double deck chromite shaking table.

Gold Shaking Table is an important mineral separator that mainly used in the gravity beneficiation plant, so the ore needs to be with heavy gravity than its gangue, then the tailings can be easily separated from the ore, in the gravity ore dressing plant, the ore usually needs to be grinded by ball mill to liberate the ore from the gangue, the slurry concentrate should be around 25-55% before feeding to the Chromite Shaking Table, where the ore is finally concentrated from the tailings. at the end of the Gold Mining Shaker Table there are three discharging oulets, and the tailing with lightest gravity will be dischared from the outter end, and the medium gravity goes to the middle oulet and the ore stay near the inner side.

Gold Shaking Table, 6S shaking table, refers to the shaking table which is mainly used in the gravity beneficiation plant, usually it needs to work with some other gravity separators, such as jigger machine, spiral chute or rotary scrubber, and so on. the jigger machine and spiral chute are mainly used for coarse separation, to make preparation for the following process, while the Gold Shaking Table is for the fine concentration. it is is widely applied to separate tungsten, tin, tantalum, niobium and other rare metal, noble metal as well, besides the Gold Shakers For Sale is also applied for manganese, chromite and so on.

Chromite Shaking Table or Gold Mining Shaker Table is generally called shaking table, which is a gravity mineral separator in mining industry, Chromite Shaking Table mainly refers the shaking table used in gold mining plant, and usually this gold mining plant is mainly a gravity gold mining plant, however the Gold Mining Shaker Table is not limit for gold ore, it can also be used for the other kind of ores, such as tin, chromite, hematite, manganese, and so on, and for the gold mining plant, there are still other solutions, such as flotation gold mining plant, CIP gold mining plant, Heap leaching gold mining plant, and so on, Mingyuan mainly provide the gravity gold mining solution, and the flotation mining plant.

Gold Shaking Table is the most commonly used model of the shaking table, it has various names according to the ore, such as it can be called gold shaking table if it's used for gold ore processing, it's called tin shaking table if it's used for tin ore, antimony shaking table for antimony ore, hematite shaking table for hematite, mananese shaking table for manganese ore. it's a gravity separator that separates the ore from its tailing by gravity difference. after the ore grinded, the ore is liberated from its gangue, the Gold Shaking Table requires the feeding concentration is within 15-30%, which can make the separation with good effect. when the slurry within the required concentrtion feeds to the Gold Shaking Table, and there is water pipes for clean water flushing, the tailing usually is light, moves faster than the ore, so the tailing is discharged from the further end, while the ore is discharged from the near end. a complete Gold Shaking Table mainly consists of the gearbox, motor, deck, water chute and the support frame.

2. Application of 6S Gold Concentrating Equipment/Gold Shakers For Sale /Shaking Table Price
Shaking table widely uses in ores such as tungsten, tin, lead, zinc, gold, silver, tantalum, niobium, monacite, zircon, ilmenite planting the fissure filling or the placer ore dressing plant in processes the 3-0.019mm granularity ore in the rough sizing and the selection work.

3. Working principle of 6S Gold Concentrating Equipment/Gold Shakers For Sale /Shaking Table Price
The table is shaken back and forth longitudinally, using a slow forward stroke and a rapid return strike that causes particles to raw along the deck parallel to the direction of motion. The lighter materials move up and over the riffles and down to exit on the tailings side of the table. Wash water is fed at the top of the table at right angles to the direction of table movement. These forces combine to move particles diagonally across the deck from the feed end and they separate out on the table according to size and density. Tables are most commonly used to recover gold from hard rock ores, but can also be used to recover other mineral materials of higher than normal density. They do an excellent job of recovering small gold particles, even with a fairly high feed rate. and the gold shaking table is widely used in the gold mining plant, chrome mining plant, tin mining plant, and so on.

4. Technical Parameters of 6S Gold Concentrating Equipment/Gold Shakers For Sale /Shaking Table Price

Rotary Trommel Screen is a cost effective gold concentrating equipment,it's effective to remove the clay and big stone in the ore. with water flushing, the clay is dissolved in the water, and discharged at the bottom of the rotary rock screening machine, and the big rocks will be discharged at the end of the trommel screen. after this process, the ore is collected with the clay water, then processes with a centrifugal concentrator and shaking table, the gold can be effectively collected, in order to ensure the recovery rate, usually it needs to add a gold sluice for the waste clay water in the gold wash plant, rotary trommel screen sometimes works with concentration table, our factory can provide good Concentration Table Price and Gold Concentrating Equipment, and in stock there is gold concentrating equipment such as crusher, ball mill, flotation machine, etc.and we can provide good shaking table price for clients. and we have different shaking table for sale.

Rotary Gold Trommel also known as gold wash trommel, which is commonly seen in gold wash plant, or even as rotary screen for short, it's also an effective sand screening machine that separates the materials into different sizes, unlike circular vibrating screen, it separates the materials with the rotation of the rotary drum, as the sieve is mounted around the drum shell, when it works, the small materials will go through the sieve whereas the big size will move forward, and the specification is different, the middle size particles will be dropped at the next stage, and the biggest sizes will be discharged at the end of the gold wash trommel, and transported to a designed distance, Mingyuan can produce both good shaking table price and good price for the other gold concentrating equipment. and in stock we have some gold concentrating equipment.