1 / 6
Model No. : | Semeka Easicoat Automotive Refinish Car Paint from China |
---|---|
Brand Name : | Semeka |
Product description
Description | Fast dry and easy to use, excellent leveling performance and adhesive force, good covering power, good anti-pollution capacity, film formation at low temperature and excellent weather resistance. It can be tuned out all kinds of plain colors, metallic colors and pearl. Mainly used for cars, business vehicles and buses.
| ||
Surface treatment |
Clean with hot suds; degrease; polish with 800#-1000# sand paper, wash with clean water, degrease again after completely dried.
| ||
Mix Ratio |
<15°C BE-1K:BE-6001= 100:(80-100)
|
15-30°C BE-1K:BE-6002= 100:(80-100) | >30°C BE-1K:BE-6003= 100:(80-100) |
Spray Gun & viscosity |
Gravity Feed: 1.2-1.5mm4-5kg/cm2
Suction Feed: 1.4-1.6mm 4-5kg/cm2
14-16 seconds by 4# Zahn Cup at 25°C | ||
Spray Method |
Wet spray 2-3 coats, volatilization time between coats: 5-10 mins. depending on the temperature and film thickness,
film thickness (dry film): 15-20μm
| ||
Proportion |
Based on 70% transfer efficiency for 20μm single coat:
Theoretical value: 8 sq.meters./ litre (diluted)
Theoretical value: 16 sq.meters./ litre (undiluted)
| ||
Application |
For hardened and polished coats, BE 2k floating coats or air-drying primer and plastic body or autobody parts sprayed with treating agent and etc.
| ||
Notes | 1.Degrease the primer film first, then dry after sanding with 800#-1000# wet sand paper
2.Appropriate amount of BCS should be added on case the temperature is above 30°C. (Refer to instructions of BCS for more details)
3.For metallic paint the film thickness should be 15-25μm, otherwise it will be easy to deduct adhesive force and make the power flocking together. |
Send your inquiry to this supplier