1 / 5
Model No. : | HY-528 |
---|---|
Brand Name : | Hong Ye RTV silicone |
Product description
RTV-2 liquid manual molding silicon
Brief description of RTV-2 liquid manual molding silicon
RTV-2 liquid manual molding siliconis a flowable liquid, and the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Note: The time for vacuum-pumping should be less than 3-5 mins ,otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
Applications ofRTV-2 liquid manual molding silicon
RTV-2 liquid manual molding siliconis mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc.
Brief features:
1. Good elasticity 2. Non deformation 3. Heat resistance 4. Low shrinkage.
Frequently asked questions of RTV-2 liquid manual molding silicon
1. How to deal with the bubbles during the mixing process?
It depends on your practical situation. Firstly you can deal the mixture with a vacuum machine if you have one; If no such machine, you can reduce the mixing ratio of the hardener from 4% to 1%-2%.Then in the prior period of the reaction of the mixture will be slower, then the air in the mixture will exhaust by itself for a longer curing time to release the bubble.
Need any more details, pls feel free to contact Coco !
Mob:86- 18938867605
Skype:COCO006OU
Whatapp:18938867605
E-mail: hyb(at) resinpu.com
Send your inquiry to this supplier