Red polyurethane fire hose of various sizes

product name	Red polyurethane fire hose of various sizes
manufacturer	Taizhou Huapeng Fire Control Co.,Ltd
Specifications and types	8-65-20
Working pressure	0.8Mpa(8kg)
burst pressure	2.4Mpa(24kg)
Lining material	pvc
caliber	2.5 inches
length	20m
weight	Nearly 3.6kg
material	The product is made from braid and pvc lining and the braid is  made up of high strength synthetic fiber which is the  international standard material.
application	Neighborhood,commercial district,indoor fire fighting  in industry,agricultural water supply and so on.
Features	Soft, convenient, low flowing resistance,affordable

         1.Strength: The strength of the polyester fiber is nearly twice as stronger as cotton and         three times stronger than wool, thus the polyester fabric is much more sturdier.        2.Elasticity: The elasticity of polyester fiber is nearly the same as cotton. Its crease        resistance is better than other fibers to make sure that the fabric can be crimp-proof and        keep the form well.        3.Heat-resisting: It can be used under the temperature of 100 to 700 degrees centigrade        and its heat resistance and heat stability are the best among all the other synthetic fibers.        4.Water-absorbing quality: The water absorbing moisture regain of polyester is low with        good insulativity and low hygroscopic property and is the best material to make fire hose.                 1.Using the chuck handle to lock the seal holder, such as the three-jaw chuck which is       the corresponding sealing ring of the fire hose bore connector to make sure that the       seal holder will not be loose. Then, cover a soft protective coat over the seal holder of       the fire hose bore.       2. Inserting the fire hose into the seal holder and rolling the remaining part to put it into       the rotary table.       3.Treading the foot switch to wave(the tighten part of the steel wire must be the groove         of the seal holder). When the grooves are fully intertwined with steel wires, setting the       foot switch free.Then, using the vise to tie knots after removing the front part of the       steel wire. Adjusting the the guide roller to twine the steel wire until the next groove is       full with wires. Cutting the steel wire and using the vise to tie both ends tightly.       Taizhou Hua Peng fire rescue equipment company is located in Taizhou, Jiangsu       Province, the factory area is more than 120,00 square meters with nearly 30 million       annual sales. We have about 100 employees, including 20 engineering and management       personnels. Our company has 10 million-meter fire hose, 10-meter safety rope, 100       thousand set fire fighting clothing and many other types of fire tools. We are a       professional fire-fighting equipment manufacturer with a large-scale production capacity.       We have 20 years’ production experience in producing the world's leading production       equipment. We have 5 fire patents.       We are looking forward to working with you!