R Series Flange Deep Groove Ball Bearing 

A widely used bearing, the deep groove ball bearing takes its name from the formed on both the inner and ourer rings of the bearing. The bearings can sustain radial and axial loads and the resultant forces of these loads and they are suitable for high speed operation.

The dimensional table below represents the various cage models and special shapes.Drawing A is the pressed cage;drawing B shows the machined cage;drawings C through F show the position and shape of the notch on the inner ring;and drawing G shows a bearing with the key groove on the machined cages are used for larger sized bearings, or bearings for high speed rotation.

Except open bearings,most bearings manufactured by our company have shields or seals installed in both sides and are packed with a lubricant.Such bearings can simplify the structure around them and also their installation. It also eliminates the needs for relubricaton. Therefore, it reduces maintenance cost.

	Deep groove ball bearings, single row
	Product information
	Principal dimensions			Basic load ratings		Fatigue	Speed ratings		Mass	Designation
				dynamic	static	load	Reference	Limiting
						limit	speed	speed
	d	D	B	C	C0	Pu				bearing
	mm			kN		kN	r/min		kg	-
	6,35	19,05	7,144	2,81	1,08	0,045	70000	50000	0,010	EEB 2-2Z
	7	14	3,5	0,956	0,4	0,017	100000	63000	0,0022	618/7
	7	14	5	0,956	0,4	0,017	100000	50000	0,0031	628/7-2Z
	7	17	5	1,48	0,56	0,024	90000	56000	0,0049	619/7
	7	17	5	1,48	0,56	0,024	90000	45000	0,0049	619/7-2Z
	7	19	6	2,34	0,95	0,04	85000	53000	0,0075	607 *
	7	19	6	2,34	0,95	0,04	-	24000	0,0075	607-2RSH *
	7	19	6	2,34	0,95	0,04	85000	43000	0,0075	607-2RSL *
	7	19	6	2,34	0,95	0,04	85000	43000	0,0075	607-2Z *
	7	19	6	2,34	0,95	0,04	-	24000	0,0075	607-RSH *
	7	19	6	2,34	0,95	0,04	85000	53000	0,0075	607-RSL *
	7	19	6	2,34	0,95	0,04	85000	53000	0,0075	607-Z *
	7	22	7	3,45	1,37	0,057	70000	45000	0,013	627 *
	7	22	7	3,45	1,37	0,057	-	22000	0,012	627-2RSH *
	7	22	7	3,45	1,37	0,057	70000	36000	0,012	627-2RSL *
	7	22	7	3,45	1,37	0,057	70000	36000	0,013	627-2Z *
	7	22	7	3,45	1,37	0,057	-	22000	0,012	627-RSH *
	7	22	7	3,45	1,37	0,057	70000	45000	0,012	627-RSL *
	7	22	7	3,45	1,37	0,057	70000	45000	0,013	627-Z *
	8	16	4	1,33	0,57	0,024	90000	56000	0,0030	618/8
	8	16	5	1,33	0,57	0,024	-	26000	0,0036	628/8-2RS1
	8	16	5	1,33	0,57	0,024	90000	45000	0,0036	628/8-2Z
	8	16	6	1,33	0,57	0,024	90000	45000	0,0043	638/8-2Z
	8	19	6	2,34	0,95	0,04	85000	43000	0,0072	607/8-2Z *
	8	19	6	2,34	0,95	0,04	85000	53000	0,0072	607/8-Z *

Vibration and noise

● The measuring parameter of vibration adopted by RNB is the vibration acceleration of vibration velocity.

● The measuring units and measuring method are specified by JB/T5314 and JB/T5313
      In the process of measuring vibration strictly controlled noise by using acoustics.

R Series Flange deep groove ball bearing