Quality export products pipe clamp joints manufacturing

      Quality export products pipe clamp joints manufacturing          Quality export products pipe clamp joints   manufacturing  Introduction :  pipe clamp joints   is used for pipe connections, reliable performance, easy to install products.  (also called steel flexible joint, clamp) is a kind of flexible joint pipe connector, reliable performance, convenient installation products. Flexible joint at low pressure, the deformation on the sealing ring to seal the objective, elastic, flexible joint in pressure increases,  pipe clamp joints the role of the media in the sealing ring, steel flexible joints to automatic sealing function, and the displacement and bending clearance compensation pipeline due to thermal expansion and contraction of the left in the room

Before the installation of connector, the first end pipe welded on both ends of pipeline, practice is: remove the bolts, the clamp is opened, the end pipe installed in accordance with the technical parameters of the corresponding pipe length fixed at both ends of the tube, adjust the parallelism, welding. B. mounted rubber ring and bolt

End pipe according to the above method after installation, after cooling, the sealing ring is arranged in the middle of two ends of the pipeline shown according to the diagram.   pipe clamp joints  procedure is as follows: first, the rubber ring sealing surface in turn, will turn to the outside, and then put into one end of the tube, is adjusted to the appropriate position, then the ring edge up, buckle cover at the other end of pipe, adjust the sealing ring on both ends of pipe position, should make the sealing ring in the middle of two end tube. For the convenience of apron successfully installed can try to ring side turn up and smearing Vaseline oil. Then put the clamps split button on the end pipe, bolt the wild card is fixed, should pay attention to: the application of bolt fastening diagonal method at the same time gradually alternately, fastening bolts at the same time, application of hammer wild card, so that the sealing ring is coated evenly, can avoid the interface card on the extrusion distortion phenomenon of sealing ring. After the completion of welding repair of the sealing surface should be removed or burr, bumps, scratches and dirt, and then spray antirust paint.   Quality export products pipe clamp joints  manufacturing  Dimension :   pipe clamp joints

External Diameter : DW	DN	Allow the pipe ends axially load Kgf	Deflection volume (mm)	turning angle	minium length br>(mm)	installment length br>(mm)	max length (mm)	supporting stud D*L(mm)
89	80	2680	20	17.90	90	100	110	M12  60
108	100	3550	20	15.06	90	100	110	M14  60
133	125	4620	20	13.05	95	105	115	M14  60
159	150	5530	20	12.09	100	110	120	M14  60
194	175	7370	20	10.51	100	110	120	M16  60
219	200	9370	20	9.33	106	116	126	M16  75
245	225	11750	20	8.36	112	122	132	M16  80
273	250	14620	20	7.51	117	127	137	M18  90
325	300	20680	20	6.32	120	130	140	M18  100
377	350	27875	20	5.45	125	135	145	M18  100
426	400	35600	20	4.80	130	140	150	M18  110
480	450	45180	20	4.28	135	145	155	M18  110
530	500	55120	20	3.88	140	150	160	M18  120
630	600	65900	22	3.27	145	155	165	M18  120
720	700	70170	22	2.86	150	160	170	M20  120
820	800	84400	22	2.51	155	165	175	M20,  130
920	900	106200	22	2.24	160	170	180	M20  130
1020	1000	116870	22	2.02	165	175	185	M20  130
1220	1200	130600	24	1.69	170	180	190	M22  140
1420	1400	146200	24	1.45	175	185	195	M22  140
1620	1600	158300	24	1.27	180	190	200	M22  140
1820	1800	166000	24	1.13	185	195	205	M22   150
2020	2000	179000	24	1.01	190	200	210	M24  150
2220	2200	187000	26	1.01	195	205	215	M24  150
2420	2400	196000	26	1.01	200	210	220	M24  150
2620	2600	206000	26	1.01	205	215	225	M24  160
2830	2800	253300	26	1.01	210	220	230	M27  160
3020	3000	260100	26	1.01	215	225	235	M27  160
3220	3200	286900	26	1.01	220	230	240	M27  180

  NOTES : PN=1.6MPa, PN=2.5MPa, PN=4.0MPa, PN=6.4MPa     Quality export products pipe clamp joints    manufacturing   pipe clamp joints      Quality export products pipe clamp joints   manufacturing   Site specific pipe clamp joints    Quality export products pipe clamp joints manufacturing   Export packaging pipe clamp joints     HENGZHONG Warehouse Exhibition     HENGZHONG Qualifications   HENGZHONG Main Products pipe clamp joints Thanks,please collect our pipe clamp joints manufacturing manufacturing manufacturing manufacturing manufacturing manufacturing manufacturing manufacturing manufacturing manufacturing pipe clamp joints pipe clamp jointspipe clamp joints