PuTian Solar Street Light Remote Control

Name: PuTian Solar Street Light Remote Control
Brand: Jiangsu Yunya Optoelectronics Technology Co., Ltd.
Rating: 4.9 (45 reviews)

Get Latest Price

Rated voltage:

DC12V/24V

Maximum current:

Send Inquiry

Model No. :
Brand Name :
Protection class :	IP67
Trait :	Buck constant current

3yrs

Yangzhou, Jiangsu, China

Manufacturer

Visit The Store

Gold Supplier
Platform Certification

Jiangsu Yunya Optoelectronics Technology Co., Ltd.

VISIT THE STORE

Product description

Product Instructions

1. Install the battery: Please install two AA batteries first, pay attention to the positive and negative poles, do not reverse the connection
2.Power on: After the battery is connected, press any key to power on, the remote control will be woken up after power on, and the function of this key will be executed at the same time
3. Shutdown: 65 seconds without a button, the operating system will automatically shut down and enter the sleep state
4. Browse parameters: After power on, press +"-" key to browse the setting parameters.
5. Model selection: After powering on, press the "sleep" and "" buttons at the same time for 1 second, the remote control will make 2 short beeps and the model selection interface will appear, then press
+" button to place the highlight bar on the model to be selected, then short press the "Settings" button to confirm, the remote control beeps once, and then enter the "Pose Setting" interface
6. Remote control mode setting: When pressing the "+" and "" keys at the same time for 1 second, the remote control will beep 2 times, and enter the "remote control setting" interface.
7. Modify parameters: After browsing to the parameters to be set, press the "Set" key, the parameters will start to flash, then press the +""" key to adjust the parameters, after the adjustment, press the "Set" key to confirm.
8. Send parameters: When the parameters are set, press the "Send" button at the controller. If the sending is successful, the 3 LED lights on the controller will flash, and the remote control will make a long beep: If the sending fails, the remote The transmitter will emit three short beeps to indicate that the transmission failed.
9. Read status: Aim at the controller and press the "Status" button, the remote controller will read the running status in the controller, if the reading is successful, the remote controller will make a long beep, and the read data will be stored in the remote controller; If the reading fails, the remote control emits three short beeps and displays the last read status.
10.Read parameters: Aim at the controller and press the "Parameter" button, the remote control will read the set parameters in the controller, if the reading is successful, the remote control will beep for a long time, and the read data will be estimated in the remote control ( If you press the "Send" button at this time, the number of rolls you just read will be sent): If the request fails, the remote control will emit three short beeps, and the parameters currently being set will be displayed at the same time.
11.Backlight: Press the "Backlight" button, the backlight of the LCD will be turned on, suitable for use in places with insufficient light.

12. Sleep: When the controller has a sleep function, press the "sleep" button, the controller enters the sleep state, press the "test" button to release the sleep

13.Test: Aim at the controller and press the test button, the controller load will be It will be turned on, and the load power corresponds to the power indicated on the controller. repeatedly

Press the "Test" button, the load output power of the controller will be switched according to 100%70%50%30%.0%. The controller works in the test mode for 1 minute, and then switches to the normal working mode after 1 minute.
14.Lock button: When the + and "sleep" buttons are pressed at the same time for 3 seconds, the device will beep 2 short times. At this time, the "set" button and the "receive" button are locked, and the parameters cannot be adjusted to prevent users from changing by mistake. Set the parameter value. To unlock, press the "+" and "Lighting" buttons simultaneously again for 3 seconds.

15.The remote control and controller are one-to-one setup, please do not operate one-to-many.

16. Turning on the backlight or lighting for a long time will reduce the battery life.

17. When the battery is low, please replace the battery in time. 18. When not in use for a long time, please remove the battery

Solar Street Light Remote Control