1 / 2
Model No. : | HT-belt 29 |
---|---|
Brand Name : | Huatao |
Length : | 80m |
Shijiazhuang, Hebei, China
Product description
1. Description :
Pulling corrugated sheet belt used specially for corrugated cardboard production lines
The conveyor belt , which is made of several types of synthetic fiber through fine knitting ,shall be installed on top of the thermal plate and
the cooling section .During operation , the conveyor belt shall endure high temperature ,high pressure and strong friction to ensure cardboards
could be bonded accurately and dried in due time , thus providing a safe and reliable guarantee for the smooth operation of the corrugated
cardboard production line .we can also supply Corrugating belts, Woven Corrugator Belts,Corrugated Traction Belt, Double Facer Belt, Corrugation felt
2. Pulling corrugated sheet belt Feature
1. Suitable as top belt with high speed (above 150m/min ) production
2. Heat and Super tear resistance
3. Inwoven Aramid edge to reinforce the belts ,reduce wear substantially and ensure a longlife time .
4. Particularly for frequent changes of board width
5. More Popular in the all corrugators plant.
6.Heat & tension treatment, no stretch or shrinkage
7.Woven structure, anti-skidding
Product |
Pulling corrugated sheet belt |
|
Normal Edge |
Inwoven Aramid Edge |
|
Thickness |
9mm |
|
Width range |
1000mm - 2800mm |
|
Heat-resistance |
220℃ |
240℃ (the kevlar edge up to 350℃) |
Tensile strength |
70Mpa |
|
Coefficient of friction |
≥ 0.40µ |
|
Weight |
(7.5±0.3)kg/㎡ |
|
Air-permeability |
2.0 m³/㎡ min |
|
Seam |
Hot JAW lacing/Clipper with rubber coated |
|
Lifetime |
60-90 million meter(or 14000 working hours) |
4. Pulling corrugated sheet belt Clipper
Clipper -- All the clipper import from American Fasteners
Hot Jaw Lacing & Clipper With Rubber Coated
Light package for air shipment, beautiful and save cost of freight fee– woven bag
Safe package for sea shipment, mainly woven bag for inner package, and fumigation free wooden box for outer package ,
also can design the package according to customer`s request. Air shipment packing
6. How To Cleaning Maintenance Of Corrugator Belt?
It is better to thoroughly clean the corrugator belt once time per month.
Here are some detail steps:
1. Keep the machine running with slow speed;
2. Make the corrugator belt fully moist by water or low pressure steam spray with much water content;
3. Put into some detergent and clear up the dirt & paste scar with soft brush;
4. After cleaning,using water to wash the belt again;
5. During the washing process,it will be greatly help to lay out shallow U-shaped iron plate or shallow groove under the corrugator belt.
It will make the cleaning water flow out to the machine outside,keep the heating panel clear and no any corrosion;
6. When necessary, you can turn on steam to heat the heating panel and make the wet corrugator belt drying with slow speed.
Normal run speed(m/min) :__________
Top Belt Length(m) x Belt Width(m) :__________
Bottom Belt Length(m) x Belt Width(m) :__________
Belt Thickness(mm):_________
Shijiazhuang, Hebei, China
Send your inquiry to this supplier