portable handheld ultrasonic flow meter
TDS-100H ultrasonic flowmeter is designed to measure the fluid velocity of liquid in a full/closed pipe. TDS-100H :Ultrasonic Flow Meters TDS-100H ultrasonic flowmeter is designed to measure the fluid velocity of liquid in a full/closed pipe. It is a handheld measurement system which is both easy to install and use. The TDS-100H operates according to the difference in the transit time of flight measured, and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next.
Flow in the same direction takes less time to travel to the second transducer than does flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity. The TDS-100H can be used for metallic, plastic and rubber tubes.
SPECIFICATIONS
Accuracy: ±1% of reading >(0.2m/s) 0.6 ft/s
Repeatability: 0.2%
Linearity: 0.5%
Response Time: 0 to 999 seconds (user configured)
Velocity: (±0.01 to 30 m/s) ±0.03 to 105 ft/s bi-directional
Temperature Range:
Standard: 0 to 70°C (32 to 158°F)
With High Temp Transducers: 0 to 160°C (32 to 320°F)
Pipe Size: DN 19 to 100 mm (0.75 to 4") standard [up to DN 6000 mm (236") with optional transducers]
Transducer Frequency: 1 MHz
Rate Units (User Configured): Meter, feet, cubic meter, cubic feet, USA gallon, liter, oil barrel, USA liquid barrel, imperial liquid barrel, million USA gallons
Totalizer: 7-digit totals for positive, negative and net flow
Liquid Types: Most liquids including clean water, sea water, waste water, chemical liquids, oil, crude oil, alcohol, beer, and more
Suspension Concentration: .20,000 ppm (may contain very small amounts of air bubbles)
Pipe Material: All metals, most plastics and fiberglass
Security: Programmable lock-out code
Display: 4 x 16 english letters
Communications: RS232C (baud rate from 75 to 115,200 bps)
Transducer Cable Length: 5 m (15')
Power: 3 "AAA" Ni-H built-in batteries (included) with 90 to 230 Vac charger, fully charged lasts over 12 hrs.
Data Logger: Built-in, stores over 2000 lines of data
Totalizer/Calibration: 7-digit press-to-go for calibration
Housing: ABS plastic with aluminum alloy protective carrying case
Case: NEMA-4 (IP65)
Dimensions: 100 H x 66 W x 20 mm D (3.9 x 2.6 x 0.8")
Weight: 514 g (1.2 lb)
Optional sensors: 1.Standard Small stent sensors(DN15-100mm) Fluid temperature: ≤ 110 Degrees Dimension: 200 × 25 × 25mm Handle Length: 100mm
2.Standard midsize stent sensors(DN50-DN700mm) (Magnetic) Fluid temperature: ≤ 110 Degrees Dimension: 280 × 40 × 40mm (2)
3. Standard Small sensors(DN15-100mm) (Magnetic) Fluid temperature: ≤ 160 Degrees Dimension: 50*30*29mm
4.Standard midsize sensors M2(DN50-DN700mm) (Magnetic) Fluid temperature: ≤ 160 Degrees Dimension: 100*40*35mm
5.Standard large size sensors L2(DN300-DN6000mm) (Magnetic) Fluid temperature: ≤ 160 Degrees Dimension: 120*55*45mm
More other production: Ultrasonic flow meter Water flow meter Gas flow meter Vortex flow meter Steam flow meter Turbine flow meter Low cost flow meter Domestic flow meter Cntact Us: