Pellet Flexible Screw Auger Conveyor Flexible Screw Conveyor Grain

Screw machines are widely used in various industrial fields, such as building materials, power, chemical industry, metallurgy, aluminium and magnesium, coal, machinery, light industry, food and food industries; for horizontal or less than 20 degrees of inclination, conveying powder, particles and small fast materials, such as cement, coal powder, grain, fertilizer, ash, sand, etc., material temperature is below 200 degrees C.
It is not recommended that screw conveyors transport materials that are easily deteriorated, sticky and caky, because these materials will adhere to the screw during transportation and will not move forward or form material accumulation on the sling to rotate the bearing. The screw machine can't work properly.
LS screw machine screw diameter from 100 mm to 800 mm, there are nine rules, length from 4 meters to 70 meters, every 0.5 meters of a gear, selection should meet the standard nominal length, special needs can be selected in the selection section submitted separately.

According to the rotary drive mode, there are two types:
C1 mode - single end drive when screw length is less than 35m.
C2 method - double-end drive when screw machine is larger than 35m.
According to the type of intermediate bearing of screw machine:
M1 - for rolling suspension bearings, using 80,000 type sealed bearings. The shaft cover has a dust-proof sealing structure. Usually used in areas where it is difficult to refuel, not greasy or greasy, with good sealing effect, long service life of suspension bearings, and temperature of output material less than 80 degree C (may not be specified when ordering)
M2 - Sliding suspension bearing with dust-proof sealing device. It is usually used to transport materials of high temperature (> 80 degree C) or liquid materials.