1 / 1
Model No. : | PS-3G |
---|---|
Brand Name : | Changlian |
Product description
Power supply | Single Phase AC220V ± 10%,50Hz ± 5%: three phase380 x (1 ± 10%) V,50 x (1 ± 5%) Hz. |
Independent output | When changing output of one subcircuit, the others wont be influenced. |
Output voltage and output current | Adjustable ranges of output voltage and output current of each subcircuit: 1%~ 100% rated value. The rated output value can be set according to users' requirement. |
Ripple coefficient | Ripple coefficient is not more than 5% when subcircuit is operating on rated output state. |
Operation mode | 1. Manual adjustment operation mode 2.Constant potential operation mode 3. Constant current operation mode |
Reference input impedance | ≥1 MQ
|
alarm function | There is alarm function when protection potential departures from control potential. |
protection | 1. overcurrent protection 2. Lightning protection: Input terminals and output terminals are equipped with 3 class lightning discharge system which includes sawtooth-type spark gap, varistor surge absorption and regulator diode limiter. And the circuits meet the requirements of IEC1024. 3.Protection against reversed polarity: The rectifier of auto-control will close automatically when there is reversed polarity.
|
Resist interference | Reference input terminal can resist AC interference and instantaneous interference. |
On-off test | On-off test can be selected through keyboard and remote control on-off interface. The time for on and off can be set In test, the current will come into the intermittent state and the unit will not alarm when the current is off and there is no current impact when unit switches to on-state from off-state. |
Measurement and display | Each subcircuit has been provided with large screen LCD to display output current, protection potential, control potential, output voltage, and operation mode of each subdrcult. The rectifier of auto-control can monitor the AC input voltage. |
Data communication interfaces | The rectifier of auto-control can be equipped with various communication interfaces (eg. USB interface, point-to-point interfaces, RS485 interface, RS232 interface, etc) to transmit, storage, measure operation data remotely, such as potential signal, current signal, voltage signal. Through these interfaces, synchronous on-off test can be controlled remotely |
Send your inquiry to this supplier