LXC706 generator controller

Products:
LXC706 a generator set from the start module, touch panel keys to select from three kinds of working conditions can be achieved manually start / stop the generator set can also be a signal to automatically start / stop the generator set by the remote boot, and be able to detect a fault (low oil pressure, water temperature / high cylinder temperature, emergency stop alarm, automatic disconnect the fuel relay overspeed) at the same time, pull down the solenoid is energized. Graphic LCD panel indicates a fault condition, providing real and effective fault alarm signal.

Product performance and features:
Features:
1, green backlight, day and night, the generator parameters are clearly visible.
2, LCD icon display alarm, alarm message is simple and clear, world-wide.
3, a variety of generator parameters are displayed on the LCD digital.
4, PC panels affixed durable, waterproof.
5, panel key operation, easy start and stop the generator, thus reducing wiring.
6, all parameters can be set on the front panel for easy commissioning and maintenance.
7, can be connected to a computer to set up and monitor via USB.
8, ultra-small size, fit (to list the specific size) small generators, especially for small gasoline unit of intelligent control.
9, with a shock apron, can achieve waterproof and shockproof panel.
10, install assembly: Flame retardant ABS housing, pluggable terminal blocks, embedded installation, compact, easy to install.
Performance:
1, power range: Wide input voltage (8 ~ 35) VDC, able to adapt to different starting battery voltage environments;
2, with a microprocessor core, the screen icon symbol for LCD display, touch button operation;
3, with the power, speed, temperature, pressure, liquid level sensor input ports for digital display of electricity.
Can detect and display of power are: power generation voltage V Frequency Hz engine temperature ºC oil pressure kPa speed rpm total running time H, the battery voltage V, fuel level%.
4, power voltage, battery voltage, speed, temperature, pressure, liquid level sensor thresholds can be set, you can achieve the following alarm or warning amount: oil pressure, water temperature / high cylinder temperature speeding, failure due to speed emergency stop start stop failure, power generation voltage is too high, too low, too high frequency power, low battery voltage is too high, too low fuel level low
5, with the idle speed control and ETS function;
6, with three kinds of operation: manual, automatic, stop;
7, the controller can be set by software to the engine controller (do not select power voltage input), adapted to control the pump unit, etc.;
8, the panel has a red light emitting diode (LED) display the working status and alarm;
9, a variety of temperature, pressure and oil level sensor can be used directly, and custom parameters; temperature, pressure and temperature sensors, pressure alarm parallel role in providing the digital level of protection, respectively while increasing;
10, a variety of starting conditions (speed sensor, hydraulic, power generation) optional;
11,4 relay fixed output port (fuel output, start output, shut down output, idle output);
12,1 programmable outputs can be set to public alarm output, shutdown fail output, preheat output or idle speed control output and other functions;
13, allows the user to change the setting of its parameters, and memory in the internal FLASH memory when the system is powered down it will not be lost, the controller of all parameters can be adjusted from the controller front panel, or via USB from a PC USB supplies power to the controller, set parameters through monitoring software;

Specifications:
Operating voltage: DC8.0V to 35.0V continuous power supply
Total power consumption Standby: 12V: 0.3W, 24V: 0.4W
Work: 12V: 1W, 24V: 1.1W
Alternator Voltage Input: Single-phase two-wire 15V AC - 360 V AC (ph-N)
Alternator Frequency: 50 / 60Hz
Speed sensor voltage: 1V to 24V (rms)
Speed sensor frequency: max 10kHz
The maximum total running time: 99,999.9 hours (after the decimal point for the tenth hour, 6 minutes change that once)
Start relay output: 1Amp DC28V DC power supply output B +
Fuel relay output: 1Amp DC28V DC power supply output B +
Shutdown relay output: 1Amp DC28V DC power supply output B +
Idle relay outputs: 1Amp DC28V DC power supply output B +
Programmable relay outputs: 1Amp DC28V DC power supply output B +
Switch input port: connected B-
Dimensions: 97mm x 78mm x 44mm
Hole Size: 78mm x 66mm
Working conditions: Temperature: (- 25 ~ + 70) ºC Relative humidity: (20 ~ 90)% non-condensing
Storage conditions: Temperature: (- 30 ~ + 80) ºC
Protection class: IP55: when waterproof rubber ring between the controller and the control panel.
IP42: When there is no waterproof rubber ring between the controller and the control panel.
Dielectric strength: Object: between input / output / power reference standard: IEC688-1992 test methods: AC1.5kV / 1min leakage current 1mA
Weight: 0.15kg