Long Span Roofing Sheet Production Line

Long Span Roofing Sheet Production Line:

Long Span Roofing Sheet Production Line expansion of decoiler, face plate Forming unit, hydraulic die cutting device, curved panel forming unit, control system, Hydraulic system, run the straight and curved plate and all other accessories. All the parts Be installed in a mobile car. Therefore, it is suitable for field work.

Advantages of Long Span Roofing Sheet Production Line:

a.There is a brake system on our uncoiler, if the machine stops suddenly, the uncoiler can be stopped accordingly.

b.14-steps to form, including the first step--Rubber shaft, it fixes steel sheet tightly from the beginning. Also there is one row Rubber Roller in the middle of each shaft, coordinating different thickness of steel sheets tightly when roll forming.

c.Long Span Roofing Sheet Machine includes 20 wider rollers than other supplier, which can make the appearance of finished sheet more beautiful and stronger.

d.Long Span Roofing Sheet Machine`s rollers and axles are connected with a pin inside and screw outside, and with reinforcing design on both sides of rollers, which can fix the rollers and axles more tighten and work for a long time without deformation.

e.Gear, Sprocket driving from superior workmanship.

f.Adopt automotive rear axle as the axle of our machine with size of 900-20 tires, can load more and has better impact resistance and damping effect.

g.10mm thickness, smooth arch plate, produced by CNC machining centre.

h.Cutting material: Cr12 MoV- Best and sharpest cutting material

i.Deck of foundation: CHINA An Steel (it used to produce boat).

j.The thickness of side plate is 20mm.

k.There is one hand wheel with scale in the curving part, you can adjust the height of span as you need with it.

One profile drawing for reference 1250-800):

Main parameters of Long Span Roof Tile Machine:

1 Mounting dimension: 8900mmX2100mmX2300mm(With single axle 4 tires)

2 Total weight: About 8 Ton

3 Control system: electric control

4 Cutting type : Mechanical Cutting

5 Seaming Power: 1.1KW+1.1KW

6 Total motor power : 15.2KW

7 Material of rollers: 45# steel, quenched HRC 58-62

8 Material of roller shafts: 45# steel, quenched HRC 55~65, hard chrome plating

9 Material of cutting blade: 12CrMoV material, Heat treatment

10 Step of rollers: 13 steps

11 Working Speed : Forming Part : 15m/min, Bending Part: 13m/min,Seaming : 16m/min

12 Max span: 4~28m

The Installation Pictures: