1 / 7
Product description
LED Controller Dimmer, 12V In-line Mini Controller RGB Color Dimmer 12VDC 144W
3 Keys Mini R101 RGB LED Strip Speed Color Dimmer Controller
Description:
Universal Red/Green/Blue (RGB) LED Mini Controller & Dimmer with on board buttons can control any 12VDC RGB LED products except the RGB-2. 20 static color modes with dimming controls and 19 dynamic color-changing modes with Speed controls. Maximum load is 4 Amps per channel - 12 Amps total. 4-pin RGB pigtail connector included.
Specifications:
SPECIFICATIONS |
|
Part number |
US-R101-RGB |
Function |
Dim and control 3 channel RGB LED products from 10~100% using PWM with controller unit |
Applications |
Specific color selection or color change with speed control modes and dimming capabilities for accent lighting |
Input Voltage |
8~16 Volts DC |
Connection Mode |
Common Anode (+) |
Output Programs |
3 channel RGB (4-pin port) |
Maximum Load Current: |
4 Amps/channel (12 Amps total) |
Output Power: |
144W @ 12V |
Modes: |
39 total (20 static and 19 dynamic) |
Control Method |
Controller buttons (no remote) |
External Dimension |
L43 Χ W11 Χ H2 mm |
Batteries |
CR2025, 3V (included) |
Net weight |
5g |
Gross weight |
7g |
Operation Instruction:
1, MODE key: Switch to dynamic mode. Press this key to switch among 19 dynamic modes. Keep pressing MODE key over one second will switch to demo mode which automatically change dynamic mode in loop.
2, COLOR key: Switch to static color mode. Press this key to switch among 20 static colors.
3, SPEED/BRIGHT key: Adjust speed or brightness. At dynamic mode, press this key to change playing speed among 5 levels; At static color mode, press this key to change color brightness among 5 levels.
Mode List:
Static Colors: |
Dynamic Color Changing: |
||
1. Blue |
11. Orange |
1. Random |
11. Tri-color instant change |
2. Green |
12. Yellow |
2. Seven-color fade |
12. Seven-color instant change |
3. Red |
13. Lime Green |
3. Tri-color cross fade |
13. Tri-color strobe |
4. Ultra-Violet Blue |
14. Aqua |
4. Seven-color cross fade |
14. Blue strobe |
5. Light Blue |
15. Sky Blue |
5. Blue fade in/out |
15. Aqua strobe |
6. Indigo |
16. Pure White |
6. Aqua fade in/out |
16. Green strobe |
7. Purple |
17. Cool White |
7. Green fade in/out |
17. Red strobe |
8. Light Purple |
18. Super Cool White |
8. Yellow fade in/out |
18. White strobe |
9. Magenta |
19. Blue White |
9. Red fade in/out |
19. Seven-color strobe |
10. Coral |
20. Deep Blue |
10. White fade in/out |
|
Technical Parameters:
External Dimension:
Interface Specifications
Power input interface and load output interface are remarked in follow picture, please refer to it.
Typical Wiring Schematic:
Installation Guide:
Arrows should be on same side
To 12V power supply
Red connect to Positive,
Black connect to Negative.
Installation:
1, Connect LED strip to OUTPUT jack as the picture, align the arrows of strip plug and output jack. Make sure the cable is well insulated and no short circuit.
2, Connect the +12V cable to DC12V power supply as the picture, make sure the cable is well insulated and no short circuit.
3, Power on and play.
Remarks:
1.) Only power with 8~16VDC power supply.
2.) Connect according to the drawing below.
3.) QUICK and SLOW speed buttons will only work when unit is in one of the color changing (dynamic) modes.
4.) Controller can control a maximum of 30 meters of our Flexible RGB LED Strip. Over 30 meters, the strips have to connect with an amplifier to reinforce the transmission of signal. Use one RGB Amplifier for every 30 meters of additional LED Strips.
5.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
Send your inquiry to this supplier