laser distance measure sensor/ laser distance sensor rs232/laser measurement sensor

ZYT-0010S laser measurement sensor
 1.Parameters   ZYT-0010S laser measurement sensor is Laser Sensors To Measure Distance Low Price With RS232/RS485/4-20mA to measure distances from 0.1 m to more than 150 m with pinpoint accuracy.   A given target can be clearly identified with the help of a red laser sighting point. In terms of operating reach, the ZYT-0010 performs depending on the reflectance, morphology and qualities of the target to be measured.   The Laser Distance Sensor With RS232/RS485/4-20mA works based on comparative phase measurement. It emits modulated high-frequency light which is diffusely reflected back from the target with a certain shift in phase to be compared with a reference signal. From the amount of phase shift, a required distance can then be determined with millimetre accuracy.   A distance measuring cycle can be triggered in three different ways: -      By sending a command from the PC or another equivalent control unit -      By making appropriate prior parameter settings for the autostart command and applying supply voltage    

Laser	620-690 nm laser diode; red light
Laser class	2 class
Output power	< 1mW
Baud rate	9600
Beam diameter	< 6 mm @ 10 m (<0.2 inch @ 30 ft) < 30 mm @ 30 m  (<1.2 inch @ 90 ft) < 60 mm @ 70 m  (<2.4 inch @ 210 ft)
Range	0.2-70m (7.5 inch to 210 ft).
Accuracy	± 1 mm ~ ± 2 mm ( ± 1/13 inch)
Data output rate	10Hz
Supply voltage (UV)	DC 9- 24V
Power con­sumption	≤2W
Data interface	RS232/RS485(ZYT-0010S,ZYT-0010M) RS232/RS422(ZYT-0010L)
Input voltages	DC 24V
Operating temperature	- 15 °C + 50 °C (5℉...122 ℉)
Storage temperature	- 30 °C + 70 °C (-22℉...158 ℉)
Protection type	IP54
Casing	Aluminium
Dimensions (L x W x H)	125×25×25mm; 130×67×29.5mm ; 193×96.2×50mm
Weight	ZYT-0010S:150g;ZYT-0010M;ZYT-0010L

  2.High quality photos -      Works in a wide range of operating voltages from 24V from an on-board vehicle supply point, an industrial direct voltage supply net or a DC power pack.   -      Features consistently low power consumption of <1 W (without Alarm).   -      Up to 30 m reach for distance measurement, with potential for more than 30 m reach if additional reflectors are mounted onto the target (depen­ding on reflectance and environmental conditions).   -      Visible laser beam for easier sighting.   -      RS232 interface port for input of measuring functions and commands from, and output of measured values to a PC or a laptop.                                                                                    ZYT-0010S                                                                              ZYT-0010M                                                                                 ZYT-0010L 3. Application Measurement of various boards (slab, plate, wood, rubber board, plastic board) width, thickness, length Hot line: pusher, bed, side guide, guide plate opening and position measurement, the roll diameter measurement Cold line: uncoiler vehicle position detection, loop detection, the roll diameter measurement Oil, chemical industry, water treatment plant: level, material level, liquid level and liquid level difference Measurement of various moving objects, especially moving objects in orbit position  4. Project Introduction   1.For Standard production line  Main application: counting, measuring the height of the object, classification, scrap  Requirements: according to the shape of the products to decide, generally indoor environment is good.  Recommendation: according to customer needs and site conditions.         2. For Metallurgy or Chemical Plant       Main application: continuous casting billet length, length, width, thickness measurement of the slab, positioning, gas tank level measurement, material pile height detection, traffic collision avoidance     Requirements: require accurate measurement, precision is millimeter, gas cabinet position detection generally need explosion-proof certificate, it should pay attention to some of the gas or vapor corrosion risk in the chemical plant.      Recommendation: high precision, ZYT-0060 series sensor is best. 5.Installation site   Copper casting workshop   Ship dock , Ship collision avoidance   About us
Beijing ZhongYuanTong Science and Technology CO., Ltd. founded in 1998, We are have a strong R & D capabilities team and production experience,
We accept customer/partner different requirements and give them satisfying products, We will provide the best service for every customer and partner
1.Feedback
Hope we can have a long term cooperation
If any question about the equipment Please email us
If need our technical section will design solution for you.
We own the best service ,if any problem happen ,Our team will do our best to solve for customer
2.Contact information :
Tel:+86(10)57465012                                                                                   
Cell Phone:+86 15801399632            
Skype:carrie1228519
Contact Name: Carrie Zhang Website: http://en.zyttech.com/                              http://zyttech.en.alibaba.com/