ISO GRAPHITE producer

fine grain graphite   1.Applications - Molds, chutes, sleeves, sheathes, linings, etc. in continuous casting systems for making shaped steel, cast iron, copper, aluminum. - Sintering molds for cemented carbides and diamond tools. - Sintering molds for electronic components. - Electrodes for EDM. - Heaters, heat shields, crucibles, boats in some industrial furnaces (such as furnaces for pulling monocrystalline silicon or optical fibers). - Bearings and seals in pumps, turbines and motors. - and so on.      2.Programmable properties - Fine grain - Homogeneous structure - High density - Excellent thermal conductivity - High mechanical strength - Proper electrical conductivity - Minimum wettability to molten metals    Typical Sizes

Block	L x W x T  (Nominal, mm)
	400x300x400, 490×400×400, 690x400x200, 650×600×300, 900x500x350, 1000x500x300, 1000x500x150, 1200x500x150, 1200x500x300, 1200x500x400,1000x500x300, 1000x520x160, 1400x500x500, 1800x650x300
Round	Diameter x Thickness (Nominal, mm)
	510×390, 510×500, 520x520, 560×510, 580×630, 600x600, 630×670, 650×650, 650×670, 680×670, 710×670, 900×400, 300x1000, 350x1000, 400x1000, 450x1000
* Other dimensions are available on request.

      Specifications

Specifcations	Unit	Isostatic Graphite
Bulk Density	g/cm3	1.8-1.88
Compressive Strength	MPa	70-95
Bending Strength	MPa	35-55
Shore Hardness		45-65
C.T.E. (100~600℃)	×10-6/℃	3.8- 4.8
Specific Resistance	μ Ω·m	10.0-15.0
Ash(Normal Grade)	ppm	500-700
Maximum Grain Size	micron	8-25

 Note: The values mentioned in this table are only for reference and not committed to any contract.       Looking forward to your cooperation Contact: Tiffany Zhang Dalian Thrive Mining Co., Ltd. Email:sales12(@)durmaterials.com Tel: 86-411-84335362 Fax: 86-411-84342356