ISO 6432 double acting C85 series pneumatic mini cylinders

Product Description

Specification
Bore size(mm)	8	10	12	16	20	25
Fluid	Air
Action type	Double acting
Max.Operating pressure	1.0Mpa
Min.Operating pressure(Mpa)	0.1	0.08		0.05
Environment and fluid temperature	-20~80℃(Built-in magent:-10~60℃)
Cushion type	Rubber cushion(Standard),Air cushion(optional)
Piston speed	50~1500mm/s
Lubrication	Not required(Non-lube);To give the oil,please use turbine No.1 oil ISO VG32.
Allowable kinetic energy(J) (Mat buffering)	0.02	0.03	0.04	0.09	0.27	0.4
Allowable kinetic energy(J) (Air buffering)	-	0.17	0.19	0.4	0.66	0.97
Pore size	M5 X 0.8				G1/8

Detailed Images Installation and application
1. When load changes in the work ,the cylinder with abundant output capacity shall be selected.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessary protection measure shall be taken in the environment with higher humidity ,much dust or water drops,oil dust and welding dregs.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be 40μm or below.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7. The cylinder shall be carried out test run without load before application.Prior to run,buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder on cylinder caused by excessive impact.
8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time,please conduct anti-rust treatment to the surface.Anti-dust caps shall be added in air inlet and outlet ports.

Packing & Delivery Packing: Normal: Transparent plastic bag + white small box + netural carton + pallet
Also custom packaging are available, ESP brand packaging are available. Shipping: Item location: Ningbo or Shanghai, China
Shipping to: Worldwide
Shipping method: by sea, by air, by express
Estimated delivery dates depend on specific order list, shipping service selected and receipt of cleared payment. Delivery time may vary.
Related Products About us ZHEJIANG YIPU PNEUMATIC TECHNOLOGY CO.,LTD. Zhejiang YIPU Pneumatic Machinery Co.,Ltd,is devoting ourself to pneumatic and hydraulic components.We integrates developing,manufacturing,sales,service and technical support together for long terms.Our sales network has covered exceed 100 countries and areas,this serve us win the high reputation and impression in the products we support and the industries second to none. Address: NO.10, Xinyang Road, Ditang Street, Yuyao, Zhejiang, China Area:200,000 sq.
Established Year: 2005
Staff: 200
Equipment: 5 automatic material-feeding machines, 113 automatic NC machines, 18 automatic assembling machines, 8 NC processing center, 11 automatic coating machines, and various inspection devices
Main Products: Pneumatic fittings, Pneumatic cylinders, Solenoid valves, Air source treatment, Silencers, Air guns, PU,PA Tubes etc