Specifications - Fast, easy installation
- High penetration strength
- Climacoat protection for exterior applications on EIFS
External Wall Insulation Fasteners For alkali-resistant glass-fibre-mesh reinforcement. The fixing dowel is made of steel nail and PVC sleeve. It can be applied on the wall such as claybrick, normal concrete, concrete block, light-concrete or pore-concrete-block, aerated concreter etc Product Information Product Packaging
Color: white or grey Shelf life and storage:one year after manufacturing date in dry ventilated place Standard: JG149-2003 Product advantages ·Suitable for all kinds of wall ·High pull-off strength for a higher security of the system ·Low thermal conduction addition value to avoid thermal bridge ·Galvanized layer on the steel nail to protect the nail from alkali Field of application It is fixed on the position where there is significant wind-suction force or if the height is more than 20m or if the finishing coat is tile etc Arrangement diagram of anchor fixing (1. 4pcs/m2 2. 6pcs/m2)
Product specification
Tools Percussion drill, Hammer Substrate requirement The substrate should be sound, dry, flat, clean and durable Application environment Temperature:5°C~35°C Avoid raining, high temperature and frost Avoid direct sunlight and class 5 wind SA EPS or XPS System is a lightweight, low density system employing extruded polystyrene insulation with adhesive and mechanical dowel fixings Coustruction Guide
1. Concrete 2. Adhesive mortar 3. Insulation 4. Protective mortar 5. Mesh reinforcement 6. Fixing Dowels 7. Protective mortar 8. Flexible tile adhesive 9. Face bricks 10. Flexible tile/face brick grout Remarks • Start drilling after sufficient hardening of the glue (min 24h later) • Clean the drilled hole • Make sure that not any damage to the thermal insulation layer or substrate were made during fixing the anchor • Make sure that the depth of drilling is deeper than 40mm and the anchoring depth is min. 30mm • The top of anchor can not be protrudent out of the surface of the thermal insulation layer • For the tile system the anchor must be fixed through the thermal insulation layer, the alkali-resistant glass-fibre-mesh and fresh base coat; for the plaster system the anchor can fixed directlythrough the thermal insulation layer