Video
1 / 6
Model No. : | Al2O3 392 |
---|---|
Brand Name : | Hard |
Type : | Plate |
Shenzhen, Guangdong, China
Product description
insulating customized 95 99 alumina ceramic sleeve ferrule
Reputation depends on quality, quality comes from Hard!
Alumina Ceramics:
) When pouring large products, in areas with large shrinkage such as edges and corners, before the grouting, you can affix silk cloth to the corresponding place in the model to make the speed of moisture movement of each part as balanced as possible to prevent cracking. For core-shaped products, stone powder is sprinkled on the core in advance to help demoulding. (4) Master the length of time to eat the pulp to ensure the thickness of the green body. (5) Open the air eyes before placing the pulp, the speed should not be too fast In order to avoid negative pressure in the model and cause the body to leave the model prematurely and cause deformation or collapse. (6) When repairing, the component body should be slightly lower than the main body by 2% ~ 3%. Ceramic grouting Forming mold manufacturing process 1 Mold manufacturing process The production of sanitary ceramic molds is a complex and meticulous task that requires superb skills. In order to make a working mold for grouting, a series of rigorous work is required. Its general The manufacturing process can be divided into the following five steps: Step 1: The prototype is produced in the same size as the sanitary ceramic product. It is made according to the design drawing (or sample). If the physical sample needs to be copied, the first step can be omitted. Step 2: Make the original tire. The original tire is also called the mold, and its size is consistent with the sanitary ceramic body. According to the prototype, it is made by putting a rule (increasing the total shrinkage during the drying and firing process). In some cases, it can also be made directly according to the design drawing or a physical sample. The mold is made from the original tire.
High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1600°), good thermal diffusivity, good insulativity, low cost etc.
Data Sheet↓
Color: White/IvoryThermal Shock Resistance: 200 △T°C
Maximum use temperature 1650°C
Dielectric Strength: >10 KV/mm
Dielectric Constant: 9.1er
Dielectric Loss Angle(1MHz): 0.0002-0.0003
Volume Resistivity(20°C): >1014Ω.cm
7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
Products Show
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
Video
Shenzhen, Guangdong, China
Send your inquiry to this supplier