Video
1 / 4
$2.00
≥100 Piece/Pieces
$1.85
≥500 Piece/Pieces
$1.50
≥1000 Piece/Pieces
$1.35
≥5000 Piece/Pieces
Model No. : | Standard or custom-made |
---|---|
Brand Name : | Jinghui Ceramics |
place of origin : | China |
Loudi, Hunan, China
Product description
In electronics, high vacuum technology, medical technology, sensor technology, electrical driving industries, in order to achieve in connection of ceramic between ceramic, ceramic between metal, metallized ceramics plays a critical role for joining application. In common case, a metallic layer ( Mo/Mn or W) deposited on specific section of ceramic components, then cured at high-temperature reduced atmosphere, the interface for brazing can be formed. These vacuum ceramic components are famous for their high bonding strength and hermeticity.
Small part-size to large part-size is availability, the min. diameter can be 1 mm, the largest diameter is up to 800 mm.The typical plating as below:
1. Raw ceramic + Mo/Mn metallization 2. Raw ceramic + Mo/Mn metallization + Nickle plating
Prototyping to mass production is an advantage to us because of our own comprehensive production line.
Technical Key Parameters
Leak Rate |
≤1x10-11Pa.m3/s |
Metal Layer Tensile Strength |
≥120Mpa |
Volume Resistivity |
≥108Ω•cm |
Coefficient of Thermal Expansion |
(6.5 ~ 8.0) × 10-6 /°C |
Insulation Strength |
≥18kV/mm (D•C) |
Dielectric Constant |
9~10(1MHz, 20°C) |
Cosmetic Quality:1. No cracks, no bubbles; 2. Evenly distributed glaze; 3. No contamination |
Features :
● High bonding / brazing strength ● Low leakage rate ● High Insulation strength● High mechanical strength
● Low thermal expansion ● Resistant to corrosion free of rust ● Min. electric resistance and vacuum tightness
Application:
Widely used in vacuum interrupters, Electron tubes,Gas discharge tube, Vacuum capacitor,Vacuum thyristors,
Surge arresters,Thyristor housings,Diode housings,Power grid tubes,Traveling wave tubes,Insulator rings and cylinder,X-ray tubes and so on
We have a complete comprehensive of production equipment for metallized ceramics from shaping to electroplating.
It helps us to make the dimensional consistency very well. Also, helping us to offer a competitive price.
Q 1. Is it available to provide customize products?
A: We could support custom-made demand as per different dimensions, design and metallization and plating.
Q 2. When can I get the price?
A: We regularly quote within 24 hours after we get your inquiry.
Q 4. What about the transportation and delivery date?
A: Normally we use Int`l express by our forwarder, or with client`s account number. It is about 3~5 working days.
Q 5. How to ensure the quality?
A: The dimension out of any batch will be carried out sampling inspection per International AQL standard. 100% cosmetic inspection will be done.
Video
Loudi, Hunan, China
Send your inquiry to this supplier