1 / 1
Model No. : | HX1AM-NCC |
---|---|
Brand Name : | HONGXIN |
Product description
BLADE AIR MOTOR | ||||||||||
Model | Operation Data | Maximum Torque | ||||||||
Power | Torque | Rotate Speed | Air Consumption | Rotate Speed | Torque | |||||
hp | kW | Nm | lb.in | rpm | m³/h | cfm | rpm | Nm | lb.in | |
HX1AM | 0.45 | 0.33 | 0.31 | 2.75 | 10000 | 35.1 | 20.5 | 650 | 0.65 | 5.60 |
HX1UP | 0.45 | 0.33 | 0.58 | 5.25 | 6000 | 47 | 27 | 500 | 0.68 | 6.00 |
HX2AM | 0.93 | 0.68 | 2.20 | 19.50 | 3000 | 49.5 | 30 | 350 | 3.05 | 26.10 |
HX4AM | 1.70 | 1.30 | 4.10 | 36.00 | 3000 | 132.5 | 78 | 300 | 6.3 | 56.00 |
HX6AM | 4.00 | 3.00 | 10.00 | 84.00 | 3000 | 228 | 128 | 300 | 13 | 115.00 |
HX8AM | 5.25 | 3.90 | 14.40 | 132.00 | 2500 | 293 | 175 | 300 | 21 | 185.00 |
HX16AM | 9.50 | 7.00 | 34.00 | 290.00 | 2000 | 475 | 275 | 300 | 43 | 372.00 |
Symptom | Possible Cause(s) | Corrective Action |
Doesn’t Run. | 1. Dirt or foreign material. 2. Internal rust. 3. Motor is jammed. 4. Worn Vanes 5. Bearing Failure | 1. Inspect and wash. 2. Inspect and wash. 3. Disassemble and clean. 4. Inspect and replace. 5. Inspect and replace. |
Runs Well Then Slows Down. | 1. Restricted exhaust. 2. Motor requires cleaning. 3. Air source inadequate. 4. Air source far from motor. 5. The sealant is corrosion. | 1. Inspect and repair. 2. Disassembly and clean 3. Check air resource. 4. Adjust air resource. 5. Inspect and replace. |
Low Torque. | 1. Dirt or foreign material. 2. Low air pressure. 3. Motor requires cleaning. 4. Worn out bearings. 5. Worn air motor vanes. 6. The sealant is corrosion. | 1. Disassemble and clean. 2. Increase pressure. 3. Disassembly and clean 4. Inspect and replace. 5. Inspect and replace. 6. Inspect and replace. |
Low Speed. | 1. Dirt or foreign material present. 2. Internal rust. 3. Low air pressure. 4. Air source restricted. 5. Restricted exhaust. 6. Motor is jammed. 7. Air source CFM inadequate. 8. Air source far from motor. 9. Worn Vanes | 1. Disassemble and clean. 2. Inspect and wash. 3. Increase pressure. 4. Check air hose. 5. Inspect and repair. 6. Disassembly and clean. 7. Check air resource. 8. Adjust air resource. 9. Inspect and replace. |
Send your inquiry to this supplier