High Quality Hammer Crusher for Brick Factory Machine

High quality hammer crusher for brick facrory machinery

Crusher hammer Application:
Crusher hammer is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture, such as coal, cement, gypsum, alumen, brick, tile, limestone, etc. It has the features of simple structure, big crushing ratio, high production efficiency, uniform particle size, etc. This equipment can be adjusted to reach various discharged granularity as the customers' requests.

Crusher hammer Features:
1. Big reduction ratio: Maximum feeding size is 1.3-1.5m; 3-150mm of discharging size.
2. High fineness of discharging size: Favorable shape with aggregate, the powdery material is no more than 20%.
3. Simple process: The two or three stage crushing is reduced into single stage.
4. Economical: Small capacity of matched motor greatly reduces the production cost.
5. Low running cost: Smaller power, so the production cost is decreased greatly.
Working Principle of Crusher hammer:
Motor drives rotor to rotate in high speed in the crushing cavity. The materials are feeded into the machine through the upper feeding opening and are striked, impacted, sheared and grinded by high speed moving. Under the bottom of rotor, it is equipped with sieve plate. Among the crushed materials fractions that is less than mesh size are discharged through sieve plate, materials fractions that is bigger than mesh size are kept on the sieve plate to be striked and grinded by hammer and they are discharged out of machine finally. The main woriking parts of hammer crusher is the rotor with hammer. Rotor consists of main shaft, disc, pin roll and hammer.

We also supply full set of turnkey project for production line brick making machine, including the complete line design, engineering management, civil engineering of kiln and drying chamber, the foundation building, supplying, installation of all the equipments, the supplying and installation of compressed air, water and power system and etc. After we complete the whole project, we will pass the production line to customer for using directly.

The main equipments on the brick producing line we can supply as bellow:
1. Raw Material Treatment Machine---------Box Feeder, Double Shaft Mixer, Crusher, belt Conveyor.
2. Brick Forming Machine-------Double Stage Vacuum Extruder, Automatic Cutting Machine, Mixer and Extruding Machine.
3. Drying System--------Small Section Tunnel Drying Chamber, Single Layer Dryer.
4. Firing System---------Hoffman Kiln, Tunnel Kiln.
5. Automatic Brick Loading and Unloading Machine, Automatic Robot Brick stacking and Automatic Brick Setting Machine, Automatic brick packaging machine.