I
Q:Can you describe about the hydrophilic water stop?
A: Water swellable rubber sealing strip is imported with special rubber as the main raw material,It consists of inorganic absorbent material, high viscosity resin and other materials,by banburying,mixing,squeezing.
II
Q:What are the characteristics of the hydrophilic water stop?
A:The following are the characteristics of the hydrophilic water stop:
1. It is permanently active system, which swells up to approximately (150%~300%).
|
2. It is an ecological and user friendly system: simple and quick to install by means of gun nailing.
|
3. The composition of bentonite water stop prevents premature swelling.
|
4. The water-stop has a proven track record in water treatment plants, water purification plants, water tanks, metro works and other concrete structures subject to high water pressure.
|
5. It can resist hydrostatic pressures of up to 80 meters of 8 bar water column.
|
6. The durability and performance of the bentonite water-stop will exceed the design life of the structure (bentonite is a product of nature).
|
7. The highly elastic and plastic properties of bentonite water stop will easily counterbalance the initial concrete shrinkage of the structure.
|
8. Can fill small honeycombs.
|
9. Will not dissolve in water and it is non-polluting
|
III
Q:What's the propertities of the hydrophilic water stop ?
A:
Description
|
Index
|
1. Hardness ( Shore A )
|
60±5
|
60±5
|
60±5
|
2.Tensile strength,MPa ≥
|
15
|
12
|
10
|
3.Elongation at break,% ≥
|
380
|
380
|
300
|
4.Compression set %
|
70°C×24h, % ≤
|
35
|
35
|
35
|
23°C×168h, % ≤
|
20
|
20
|
20
|
5.Tear strength,KN/m ≥
|
30
|
25
|
25
|
6.Brittleness temperature,°C ≤
|
-45
|
-40
|
-40
|
7.Hot air aging
|
70°C× 168h
|
Hardness(shore A)
|
+8
|
-
|
-
|
Tensile strength,MPa ≥
|
12
|
10
|
-
|
Elongation at break,% ≥
|
300
|
300
|
-
|
100°C×168h
|
Hardness(shore A)
|
-
|
-
|
+8
|
Tensile strength,MPa ≥
|
-
|
-
|
9
|
Elongation at break,% ≥
|
-
|
-
|
250
|
8.Resistance to ozone ageing 50 pphm:20%,48h
|
Grade2
|
Grade2
|
Grade0
|
9.Adhesion of rubber to metal
|
With contact section in elastomer
|
IV
Q:What are the main purposes of the hydrophilic water stop?
A:Rubber Water stop Belt is widely used in various types of concrete structure.
Such as:
1.roofing and other building material.
|
2.Block dam, reservoir, the subway, culverts, tunnels underground building.
|
3.Mainly structures of water-proof deformed joints.
|
4.Water conservancy, construction, civil air defense, , highway, railway, Bridges.
|
V
Q:Please tell me about the types of the hydrophilic water stop.
A:
1. Rubber water stop
|
2. Swellable rubber water stops/Hydrophilic rubber waterstop belt
|
3. Steel plate typed rubber water stop
|