High Hardness Home Decor Making Epoxy Resin

【Features】
● DILI brand epoxy crystal glue, low viscosity, good leveling, good defoaming performance, high transparency, yellowing resistance
● It can be cured at room temperature or medium temperature, the curing speed is moderate, and the product has excellent weather resistance.
● The cured product has good transparency, high hardness, smooth and bright surface, no bubbles and strong adhesion;
● The cured product has good solvent resistance, wound resistance and yellowing resistance.

Suitable for small ornaments, large ornaments，art table top coating, drip glue nameplates, river 

table making, casting statues, small casting jewelry and other resin crafts;

【Instructions】
●Proportion: A:B = 3:1 (weight ratio)
●Usable time: 25℃×30-40 minutes (100g mixing amount)
●Curing conditions: 80°C×1-1.5 hours (25°C for 8-12 hours)
The surface of the glue-dropping product needs to be kept dry and clean; take the amount according to the proportion and weigh it accurately. Please remember that the proportion is a weight ratio rather than a volume ratio. After mixing agents A and B, they must be fully stirred to avoid incomplete curing. ;
●If it is baked, the basic curing will be completed after 3 hours of baking, take the product out of the oven and let it cool naturally.

Here are the dos and don'ts for you with epoxy:

1. Epoxy resin should not be mixed too much at one time, otherwise it will heat up and solidify quickly, resulting 

in bubbles and yellowing! (Appropriate increase or decrease according to the temperature)
2. All resins have a slight smell, and the smell of our epoxy glue is mild.
3. After the resin is fully cured, the volume will shrink a little, and there will be a slight depression in the middle.

It is recommended to make up the glue again! Or polish!
4. Please pour the resin glue adjusted according to the proportion into the mold as soon as possible, and do not

place a mixing container on the surface, keep it still and wait for it to solidify.
5. A small number of people may be allergic to glue, so it is recommended to wear gloves.