High efficiency biomass rotary drum dryer

                                 High efficiency biomass rotary drum dryer     Introduction: Rotary dryer is to dry fly ash, gypsum, and other industry dust.   Rotary dry equipment is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc.The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency. Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.   Features: 1) Professional design 2) Low energy consumption 3) Long life span; Simple structure 4) Low cost and high output 5) ISO9001:2000, CE, CQC, and CCC Certificate       State-of-the-art research and development GHM dryer technology is tested and verified in an extensive in-house lab facility as well as in detailed drum measurements in the field.  GHM cooperates with universities to benchmark product quality and ensure that the  latest technology is always implemented in GHM dryers.     Technology from material to final product GHM will provide the best solution for each customer to obtain the highest quality in the  most efficient process – from material handling to final product. The ability to define  the optimum particle size for the overall process makes GHMunique as a supplier of  complete plants. The most suitable incoming material for the dryer is ensured, which again increases dryer efficiency.     Parameters:

Model	Shell Diameter(mm)	Shell Length(mm)	Slope(.)	Rotary Speed(r/min)	Weight(t)	Motor Power(kw)	Volume (m3)
Φ0.6×8	600	8000	3-5	8	5.1	6-4	2.26
Φ0.8×10	800	10000	3-5	7.2	6.9	6-4	5.02
Φ1.0×10	1000	10000	3-5	6.73	7.5	6-5.5	7.85
Φ1.2×12	1200	12000	3-5	5.8	13.1	6-11	13.31
Φ1.5×12	1500	12000	3-5	4.8	22.3	6-15	21.2
Φ2.2×14	2200	14000	3-5	3.2	52.8	30	53.22
Φ2.4×18	2400	18000	3-5	3	73.3	37	81.43
Φ2.8×24	2800	24000	3-5	2.59	97	75	147.8

      In order to provide the top quality services fo you, some information should be confirmed as follows:   +What is the Raw material ?  +What is the capacity per hour (pls note that wet raw material) +The moisture before drying ?% +The moistue after drying ? % +What is the fuel ? +Do you have some requirements about the inlet air temperature and outlet air  temperature ? +Do you have some temperatures requirements for the wet raw material and dry final  products ? +Other information offered from clients.If possible.